BLACK+DECKER BXAC40007GB Portable 3-in-1 Air Conditioner, Dehumidifier, Cooling Fan, LED Display, 3 Fan Speeds,24-Hour Timer, Remote Control, 10,000 BTU, White

Product Information

If your product is class II double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal. Cooling Mode – In cooling mode, the unit will blow out cold air to decrease the ambient temperature. A 3-in-1 air conditioner, dehumidifier and cooling fan which is suitable for all seasons and for all around the house. Press the Up or + buttons to increase the temperature, or press the Down or – buttons to decrease it.

Once this function has been activated, continuously press the Timer button again to select your desired delay time, from 1 to 24 hours. Please note that when using this method of drainage, the ‘Water’ indicator on the unit’s control panel will not flash. In terms of usage, the unit has an easy to read LED display and simple touch controls for quick and easy operation. Switch off and remove the plug from the socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.BWARNING: Before cleaning and maintenance, switch the appliance off and remove the plug from the socket, to prevent electric shock. To do this, place a thumb or small object on the grooved area on the underside of the battery cover and push it gently to the side, while simultaneously pulling the compartment away from the body of the remote. With a 10,000 BTU output and a R290 refrigerant, this air conditioner uses Class A energy efficiency for optimum performance with a low environmental impact and running cost. The number ‘0’ will appear on the unit’s LCD display to indicate the pre-set delay timer function has been selected. The LED display on the unit’s control panel will come on and air will start emitting from the vents to show the unit has been turned on.

DO NOT use any processes to clean the unit or accelerate the defrosting process, other than those recommended by the manufacturer. When the reservoir is full, both the compressor and motor will stop, the unit will emit a buzzing sound and the ‘Water’ and ‘Comp’ indicator on the unit’s control panel will begin to flash. To clean the filter, tap it lightly or use a vacuum cleaner to remove loose dust and dirt from its surface. The window ventilation system ensures collected water naturally evaporates through the window venting hose provided.We are graded electrical specialists and the majority of our products are either graded products or cosmetic seconds. Choose between a high or low speed airflow setting to maximise comfort and adjust the vertical louvre to redirect cool air throughout the room. Once it is dust and dirt-free, rinse the filter thoroughly under running water, at a temperature of no more than 40 degrees centigrade. Do not let the cable hang over the edge of a table or counter or let it come into contact with any hot surfaces.