X AUTOHAUX 4pcs 12V Universal 6 Pins Car Power Window Switch Random Light Color

Product Information

Unfortunately one of the switches has become disconnected whilst trying to rectify a problem and I’ve only managed to blow the fuse for the windows when trying to reconnect the switch. I have them working with some generic 5 pin window switches but I've been given a discovery window control panel (I think it is a disco2) complete with 4x 6pin switches. I could really do with a hand in understanding how the electric window switches work in an 06 GP (3dr).

Also, in case you didn't know, sometimes you have to "reset" the driver window Auto function if the battery has been disconnected or run too low - raise the window all the way by holding the button (don't use Auto) and hold the button up for a few seconds past when it seats. Come join the discussion about performance, reviews, reliability, modifications, troubleshooting, maintenance, for all models. After they've been pulled a few times the individual connectors in the connector block can sometimes become sloppy. You loose the feature where you can open/close whilst ignition is off BUT you could get that back by replacing the IGN live with PERM live but I wouldn't do that as it affects the security. All content is viewed and used by you at your own risk and we do not warrant the accuracy or reliability of any of the information.Also if someone would be able to give me an explanation into how the driver's side switch comes into the equation that would also be great, as I have no idea how that comes into the circuit. com/content/news/p2_articleid/153 is for a page with diagrams showing the logic of how the switches work - scroll down the page a bit for those who were as confused as me! Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place. Some after-market 5-pin switches are lit, on those I believe the light is on whenever power is available at the switch. You WILL loose some functionality, that's obviously what the ECU is for and Landrover are hardly going to pay out for something that has no use.

The wiring diagram in the service notes shows all 3 switches having 6 pins with the earths on each of the drivers side switches linked in the wiring.

I'm just deciding if i want to switch to the 6 pin switches as they would fit better into the replacement dash and have illumination. So here we are, my thoughts on the best way to wire up electric windows with the 6 pin switch and totally ignoring the window ECU. Used to have an old VW Polo, 6n1, with a switch that externally looked identical as the LandRover ones. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.

So what cuts the power if your finger is still on the button as the end of the window travel, the motors u have themselves.Your products will be sent either same day or next working day after cleared payment unless otherwise stated on the listing.

If you connect that module into your car and connect the total closure wire to the ignition then everything works as normal but as soon as you turn off the ignition the windows will close themselves. AliExpress เราจะบอกเคล็ดลับให้คุณ ก่อนที่คุณจะชำระเงินค่าสินค้าของคุณ ใช้เวลาสักครู่ในการตรวจสอบว่ามีคูปองหรือไม่แล้วคุณก็จะประหยัดกับ 6 pin power window switch ได้มากยิ่งกว่า มีส่วนลดมากมายให้คุณได้ค้นหาไม่ว่าจะเป็นคูปองผู้ใช้งานรายใหม่ไปจนถึงคูปองร้านค้า เพียงแค่เข้าไปสำรวจที่ AliExpress หรือเข้าร่วมเล่นเกมแสนสนุก! Out of my 3 original switches 1 is good, 1 doesn't work at all, the 3rd works but the bracket has lost its shape and so it wont sit tight in the hole and if you try to add some more "pull" via the wires it just pulls it apart.Manufactured in compliance with stringent industry standards, the Pipeman's Installation Solution window switches provide superior performance, especially when in need of a robust solution and reliability. No I understand it's a double pole switch but at rest it is getting two 12v connections and when the switch is activated it is a neg that is added. The switches were damaged last year when the centre console was removed and the contacts and rocker inside were lost. If doing that rolls the window up then you've got the right one otherwise do the same for the other wire. I happened to wire the windows with two gnd connections and the switch effectively changing one of these to 12v.