Replacement 12V 2A Power Adapter Charger for Erbauer 30W LED Work Light 2400LI

Product Information

your batteries if not fully shot are likely to be on there last legs at maximum around 25% capacity The ERBAUER work light with 1600 lumens (20W), offers a quality light for better work conditions and a better precision level

With its 2 foldable hooks and 2 wall fixing holes, this product offers a variety of solutions to improve and facilitate working conditions. The tripod (sold separately) allows adjustment to the height and position of the work light according to your needs

In closed position, the optical compartment is completely protected, and you can transport and store your ERBAUER work light safely had this happen with now very old bosch 10,8 now called 12v and older ryobi li ion 18v and a period off trying several times or a different charger or location has ment only one failure off perhaps seven wont charge occasions out off perhaps 20 plus batteries so dont give up try everything but after 14 years the older 2.4ah batteries though still working are down to perhaps 20% capacity so ok for radio or lights but not powertools However, both the batteries it came with are now flat and the charger will not charge them (green light only, comes on - no red charge light). In closed position, the optical compartment is completely protected and you can transport and store your ERBAUER work light safely lithium batteries can be funny things when new the protection is well synchronized between battery and charger protection circuits but as they age they can sometimes "fail" at the margins as one off the protections isn't happy

the chances off 2 completely independent battery and charger groups failing in your hands would require somthing wrong with say your voltage input from the mains as the only common factor i can think off ?? The light features 2 light modes available according to your needs: 50% or 100%. The battery life in 50% mode is 6 hours and 3 hours in 100% mode The ERBAUER work light is designed in a triangular ergonomic shape, this work light offers the best comfort and stabilitytime for somthing like ryobi one plus where the all batteries fit all tools and spares are easily found

took the battery home for the weekend, left it for a few days, perfect, it just needed heating up abit, you could try that, leave them in an aring cuboard or something for a few days, might work? Thanks for that - yes, cheap stuff normally doesn't last as long as good quality items, but I would have hoped for a longer life of both batteries. the microswitch has a thin metal arm which i bent up right at the end to meet battery when inserted and charger works fine now..Displays how much battery life is left. When plugged in, the power charge LED indicator shows the battery level and flashes until fully charged The ERBAUER work light with 800 lumens (10W), improves the brightness of your work area for better comfort. Ideal for occasional use. It's a convenient extra lighting solution The Makitas chargers I worked on had a clip-in fuse. Same goes for the bench top power supplies I've had in the past for electronics work. Surely it's worth undoing the screws and popping the top off just to see? The fuses, if they are there, are generally a clear glass type.