Razer Panthera Evo: Fully Mod-Capable - Sanwa Joystick and Buttons - Internal Storage Compartment - Tournament Arcade Stick for PS4 and PS%

Product Information

Coincidentally, a traditional controller is still necessary. The PS4’s USB drive powers the Panthera Evo exclusively. This means that, like many peripherals, the Razer cannot power on the PS4 by itself. Some TVs can automatically turn on connected devices. If you’re like me, my 4K TCL cannot do that. So, I have to have a controller next to me at all times. Panthera Evo is essential for fighter fans There are six (6) Phillips head panel screws located underneath the Panthera EVO. These hold the tinted acrylic cover in place. Each one is accessed using a mini precision screwdriver. Anything larger will risk stripping the screw. Turn carefully - the screw will take a bit of effort to loosen on first go, but will give way. Once the screws are removed, find a safe place to temporarily store them as they are quite small and easy to lose.

Razer Panthera Evo arcade fightstick review | PC Gamer

You now need to separate 11 of the Jumper Wires from each other, so you have 11 individual wires. You need to remove the Plastic Casing from the male ends of each wire. A significant change to the Panthera EVO is that it no longer has Sanwa buttons, instead, Razer has installed their own mechanical buttons, the same ones used in their keyboards. We cannot replicate this panel, so when servicing the unit upside down, we recommend that you place it on a soft cloth or towel as it tends to scuff easily on hard surfaces. The artwork, a large blue Razer logo, is essentially the same as the original. The big plus, this time around, is that the artwork can now be changed easily. Unless properly calibrated to your printer and viewing environment, your monitor does not accurately represent the brightness of paper. Artwork submissions may need adjustment to ensure prints are not too dark. Please read this helpful support article for more informationIf you do not intend to replace the pushbuttons, the process to replace artwork is complete. You can now reverse the steps to reattach the tinted acrylic cover. Another way that players can misinterpret the pushbutton size is by measuring the pushbutton plunger. Have a look at the diagram at right.

Razer Panthera Evo Arcade Stick Review - Pokde.Net Razer Panthera Evo Arcade Stick Review - Pokde.Net

DO NOT REMOVE THE FEMALE ENDS! Your wires should all look like this example wire by the time you're done.Essentially, each of the 8 pins on the bottom row goes to a specific button, while the top 8 pins all go to ground. Search through the rubber bands and try to find 8 of the smallest bands you can find. Now, place an LED on one of your buttons as best you can. Handling the artwork yourself? Review our requirements and get tips to optimize your laser etch or artwork submission.

Razer Panthera EVO plexiglass replacement : r/fightsticks Razer Panthera EVO plexiglass replacement : r/fightsticks

This will not fit the original Razer Panthera (2016-2017 model), nor Razer Atrox for Xbox One or Xbox 360. Blank plexi, custom etch plexiand artworkfor the original Panthera are available if you are looking for that model. InstallationIf you have not used our Plexworks custom services before, we recommend that you visit our support section for updated information, helpful tips, and resources to get the best output. The design of the EVO is similar to the original Panthera with a few exceptions. Firstly, there’s still the plastic exterior and metal base at the bottom, which has some anti-slip rubber strips. The original Panthera had two large rubber pads on the bottom instead of strips, but I find these work just as well on the EVO. Now, this may be worrying to some players, especially to fans of Sanwa like myself. It’s clear that Razer may have done this as some kind of cost-cutting solution. So that means they’re bad, right? Not necessarily. You see, I think Razer’s buttons work quite well – at least most of the time. If you're confused on which way to plug in the harness into the Mini, just plug it in so that the empty pins are on the left side of the Mini, like This. Each print is laser cut to your specifications, as presented by available options. You will receive the print with insert cutouts designed to fit your chosen brand. Gently press downward to remove the cutouts. Important Notes about Color Fidelity, Brightness

Artwork Print and Cut for Razer Panthera EVO - Focus Attack Artwork Print and Cut for Razer Panthera EVO - Focus Attack

Removing the original Razer pushbuttons requires disconnecting the wires that are attached to the .110" terminals on each button. It is recommended that you do not attempt to pull with a wrench or your finger; the design of the button microswitch can easily bend and distort from the force, possibly damaging the button terminals. Instead, use needle-nose pliers to grasp the disconnects by their tabs (circled in green), then squeeze in and upward. If the tabs are pressed in correctly, the disconnect should lift with just a bit of effort. If you find much resistance, retry pinching the pliers around the tabs and squeeze again. Now just connect each wire to its respective button, and connect each pin on the ground wire to each button. Similarly measuring the button rim can lead to confusion, as it is intentionally larger than the button hole it is placed in. You don't want to use these measurements. Instead, review the button housing diameter, or the hole the button will be placed in. You can do this with a caliper - a digital caliper is often quite helpful for this and other arcade-related projects. Control Panel Configuration NOTE: YOU DO NOT NEED TO USE ALL 8 GROUND PINS ON THE RAZER PCB!!! The Razer 16-pin harness had 8 individual wires that each connected ground to a different button. However, your new 20-pin harness that connects to the Kaimana Mini uses 1 ground wire that daisy-chains to every button. This means you only need one ground wire for all of the buttons. I corroborated this with a certified electrician, so no need to somehow condense 8 ground wires into 1 wire for no reason whatsoever!This turned out better than I had even envisioned it. The team here does great work on everything they do but this custom artwork print was amazing!! Installed without a hitch too. Thanks guys!! Damion Belk Do this by using a very fine-point object like an Exacto knife to lift up the Small Tab and pull the wire out of it, with the male end looking like This. Pushbutton manufacturers such as Sanwa, Seimitsu, Crown and GamerFinger have each produced specific models with a clear or translucent plastic cap and flat plunger. These are often used to display a graphical insert, allowing you to enhance the button's appearance. That said, each button manufacturer has designed the artwork cap with a different diameter than their competitors. For example, GamerFinger's artwork cap has a diameter that is slightly larger than Seimitsu or Sanwa. An insert cut for a Sanwa artwork cap will fit loosely when inserted into the GamerFinger artwork cap. This is an undesirable result that can produce a white or colored ring around the insert.