Elmer's Disappearing Purple Glue Sticks | Dries Clear | Great for Schools & Crafting | Washable & Child-Friendly | 6g | 3 Count

Product Information

That’s because the ‘purple’ totally dissolves in water and it washes off cleanly. Users think that part of the appeal is that it is not as strong as some of the other white glues. Don’t be surprised if Elmer’s isn’t a miracle solution for you when you’re using non-PLA filaments, printing something with delicate parts, etc. In these situations, I recommend opting for a more specialized 3D printer glue, such as the one below. Best Glue Overall: Layerneer Bed Weld Tragically, Elmer’s doesn’t work for every situation. There’s a complicated range of different factors that go into whether or not you’re getting good first layer adhesion, including the type of filament, your print bed material, the print in question, and your settings.

Many specialty glues do have restrictions as to what types of build plates and filaments can be used with them, which limits when they’re useful. So, considering the reliability and filament compatibility you’re getting, Magigoo is a solid secondary option to Layerneer Bed Weld – especially if TPU is giving you the most trouble. There’s little to be disappointed in (the applicator, mainly), and lots to love. Best Multi-Purpose Glue: 3D Gloop! Overall, Layerneer Bed Weld has superb adhesion and makes things easy to pop off the print bed as soon as it cools. In other words, it works for both types of adhesion issues: over adhesion and under-adhesion. I rate it as the best on the market for all these reasons. Remove the object: Once the print is finished, wait for it to cool down completely, then remove with a spatula.To use liquid glue, first dilute it 1 to 1 with water in a cup or bowl. Then use a wide (cheap!) paint brush to apply an even coat of glue to your bed surface. Wait for it to dry before printing. Can I use Gorilla Glue or Super Glue on my 3D printer? Keep a close eye on the initial layers of the print. Make sure that the layers of the object are adhering properly to the glue layer. If you notice any issues, such as corners lifting or warping, you may need to adjust your print settings or tweak the glue application for better results. However, certain filaments like TPU aren’t supported. Layerneer reports a small amount of corner lifting with TPU on their internal warp stress tests, but some people have found a great deal of success with it regardless.

Firstly, Gloop! sells chemical adhesive that works for one type of filament, and their lineup includes only three different types: PLA, PET, and ABS. That might be okay depending on what you like to print with, or it might be a complete dealbreaker. Painter’s tape is even worse. It only works consistently on lower bed temperatures and is slightly harder to source than the other two. It’s the type of adhesive you should use in a pinch – not your go-to solution. If you want consistent, worry-free results, then Layerneer Bed Weldis for you. It’s a very utilitarian and no-frills option. When you’re putting together a scrapbook of precious photos or paper memorabilia that can’t be replaced or replicated, you want to make sure you’re using high quality glue that won’t damage the paper it’s applied to.It’s inevitable when working with a paper craft project that you’ll end up with glue in places you don’t want. If you ever create multi-part 3D prints, Gloop! can fuse them seamlessly. If you regularly feel annoyed with layer lines but don’t want to shell out hundreds for a resin printer, Gloop! can help with that, too. For more on this, we also have an article on the best glues for 3D prints.