KILZ Oil Adhesion Primer, Interior/Exterior, 1 Quart

Product Information

If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry. Use the extension pole on your paint roller to make it easier to reach up to the ceiling without getting on a ladder, which is no fun. Kilz Original Primer has not changed its formula. To this day, this combination primer and sealer is regarded as the best solution for interior and exterior surfaces in terms of preventing stains and sealing out unpleasant odors from smoke, grease, and pet secretions. Why Painting Professionals Trust Kilz

You’re changing the color from darker to lighter. The tinted primer reduces the number of paint coats needed to hide the darker base coat. We've seen examples of failed installations where large-format tiles come loose and almost no adhesive has adhered to the substrate below. No one wants that, on any project size!Bare wood: Apply an oil-based or latex primer to wood that has never been stained or painted to help seal the porous surface. Keep in mind that oil-based primers tend to emit more VOCs (smelly pollutants) than do latex primers. Paint with primer is best for previously painted walls. Primers are recommended for use on any surface that has not been previously painted. Q. Do I have to use paint primer? The KILZ Adhesion primer is white, so it will cover the stains or darker paint you may want to hide. You can buy it in quarts and gallons. Are you going to be painting a bathroom? Did you know that you should also add primer before painting in bathrooms due to the higher moisture and humidity? In this article, you’ll learn more about our favorite primer for bathroom walls & ceilings and learn how to prime a wall. Again, for this part of the test I had run out of Whitsons, so the four products tested were Zinsser B-I-N, Zinsser AllCoat, Crown PX3 and Crown PX4.

Tinting: KILZ 2 ALL-PURPOSE Primer may be tinted with up to 2 ounces of universal colorant per gallon. Tinting to a lighter shade than the topcoat is recommended. Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming.Use a small foam roller or paint brush to apply a thin coat of primer to your substrate. Take care not to over-apply primer, as this can increase drying times Roller – High quality 3/8-1/2" nap on smooth surfaces or 1/2-3/4" nap on semi-rough or porous surfaces.