Clover Hot Hemmer-6-inch x 5-inch, Nylon, Original Version, Each

Product Information

You can use the Hot Hemmer with either a dry or steam iron, and it will withstand temperatures up to 428˚F (220˚C). As with ironing on any surface, if you hold your iron in one place on the Hot Hemmer for an extended period of time, the surface can become discolored.

If we measure, mark, cut, pin, press and sew accurately the result is something that is pleasing to us. If we don’t . . . ah well, then not so much. But there’s more to consider.

You may also like…

Finally, the material it's made of: not sure what it is, but it feels almost like a grippier version of felt. (Might be that stuff you get at JoAnn's to stiffen the bottom of purses with?) Other reviewers have mentioned how nice that grippiness can be because you can place your fabric on whatever depth of hem you want and get your hands out of the way. I find this is true for some fabrics but not nearly all—so if that's why you wanted it, just be aware that maybe only 50% of fabric types grip enough to let go. Refold along your second set of ¼” crease lines and press. If you’ve been careful with your measurements and pressing, this second re-fold will create a diagonal line where your two finished edged meet, making a neat split corner.

With this wider hem, we often suggest cutting off the point of the first corner fold to reduce bulk. To do this, fold in the point of the corner as above and press.

JOIN OUR NEWSLETTER

Below are the steps a ¼” double-turn hem. This sample is a simple napkin project, but you can use the technique anytime you need a narrow hemmed corner. We love it for single-layer apron skirt corners, placemats, even lightweight blankets. Saves time – We don’t have to measure and mark hems, pin hems, iron around pins and then remove pins. And it’s perfect every time so no “do overs”. Fold in the corner a second time, at¼” andagain at a 45˚ angle. The outer edges of this second fold should line up with your first set of crease lines. Press. Measure, fold and iron any hem in one smooth motion. Measure, fold, press. Repeat as necessary for the length or your project. The Hot Ruler with its increased length makes short work of long hems. Both take all of the guess work out of even, consistent hems. No last minute surprises where hem lines do not match up. Pleats anyone? Yes, you can use it to measure, fold and press pleats as well. Then make sure the Hot Hemmer is placed so the diagonal line is pointing towards the corner of your fabric, with the corner touching the point your 2 hems intersect.

The diagonal line across the Hot Hemmer helps you sew mitered corners with ease. Start by pressing your hem on either side of the corner using the Hot Hemmer to get it to the exact depth you want. Following the steps above for getting an accurate straight hem. It worked equally well for the larger hem and heavier fabric shown below as well as for the very narrow hem in lightweight fabric shown above. Edgestitch all around, staying close to the inner fold and making sure your stitching crosses over the split corner to help the point stays closed. It can help to use a Quarter Inch Seam foot to keep a precise seam allowance all around.The Hot Hemmer and Hot Ruler will revolutionize the way you do hems, mitered corners and pressed curves. They truly are the “go to” tools for anyone who does hems, mitered corners or pressed curves.