DWE7485 Compact Table Saw 1850W 240V

Product Information

The drive system connects the motor to the blade of the table saw, providing a mechanism for spinning the blade.

Dwe7491rs Replacement Fence: DEWALT OEM N638742 is a replacement fence for table saws, that can work well for the dwe7491 rs model as well. This table saw will allow you to adjust the angle of the blade from 90-degrees up and down to a maximum angle of 45-degrees. It has blade adjustments that are easy to reach and allow you to make small adjustments to the blade’s height without straining yourself. This feature was very helpful in maintaining the cleanliness of my workspace, especially over long hours. I had two options to collect the chips produced while cutting.

The tabletop is made from lighter compound metals, this is the first tabletop I’ve expedited using these compound metals, but this design element is what helps reduce the overall weight of the table saw. It also runs smoothly at 5800 RPM so this is a greater upgrade from older models. Since this is smaller and lightweight, it can work for cost-effective and simpler tasks. Learn more from the DeWalt table saw dwe7485 review. Dewalt dwe7491 vs Dewalt Table Saw dwe7485:Difference Features I spent some time online researching what others thought about the DEWALT DWE7485. There were quite a few positive opinions expressed in places like the Reddit community threads. The DWE7485 has a 2 1/2 inch dust port which will fit many shop vacs such as my Bosch shop vac VAC140A dust extractor; if you need to source a conversion kit to fit shouldn’t be difficult. Though you do need to keep an eye on the hose to make sure that it doesn’t interfere with the riving knife.

The loss of accuracy in angled cuts and largely plastic construction reduce the premium feel usually offered by Dewalt. The safety features on this product are commendable. Dewalt decided to take no chance and give them a product so safe that customers would trust it irrespective of their experience around power tools. Equipped with a 210 mm blade diameter and a 30 mm spindle bore, this saw is capable of delivering precise and accurate cuts. At a cutting depth of 65 mm at 90º and 45 mm at 45º, it offers versatility for different cutting angles and depths. While the upper port had its minor issues, I was amazed by how well the bottom port collected chips when connected to my shop vac.

Dewalt dwe7491 vs Dewalt Table Saw dwe7485:Difference

However, if you are looking for something with more features that cabinet makers and professional woodworkers may need, then you may have to look elsewhere. This design is also lightweight. It weighs only 46 pounds. That makes it easier for one person to carry, but it also means that some features and materials were left off the design. 2. Table and rails

Once I gained a little experience with adjusting and reading the measurements of the fence system, I found no use of my measurement tape in the cutting process.As a customer, I felt so much more confident and safe operating this particular table saw. What I really enjoyed was that these safety features were provided while ensuring they did not come in the way of the true purpose of the DWE7485, which is cutting through materials. Blade dimensions: This table saw is compatible with an 8-¼” blade that is provided by the manufacturer. It has a maximum cutting depth of 2-9/16” at 90° while having a maximum blade tilt of 45°. The maximum rip cut capacity of the blade is 24.5” on both sides. The difference lies mainly in the blades and the stand provided with the table saw. DWE7491 is a basic model with no folding stand. But DWE7491RS has a rolling stand for support. It can also be folded after use to store and carry easily. What Is The Difference Between Dwe7491 And Dwe7492? An efficient table saw needs more than 17 amps to operate powerfully and provide accurate cutting. Even though different models are seen to have different amps, most DeWalt table saws have around 15 amps motor on average with at least 2 hp. Conclusion On Dwe7491 Vs Dwe7485 On the other hand, the DeWalt dwe7485 table saw was created to replace the DW745 model with the same size. But it doesn’t have a 10-inch blade and is much smaller than DWE7491. The rip capacity is, however, high at 24 1/2 inches to cut around a 48-inch sheet of plywood.