Cisco Catalyst 1000-8P-2G-L Network Switch, 8 Gigabit Ethernet (GbE) PoE+ Ports, 670W PoE Budget, two 1 G SFP/RJ-45 Combo Ports, Fanless Operation, Enhanced Limited (C1000-8P-2G-L)

Product Information

For the best support of the switch and cables, make sure that you attach the switch securely to a wall stud or to a firmly After a successful POST, unplug the power cord from the switch and install the switch on a wall, on a table, or on a shelf. objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. The ports provide PoE support for devices compliant with IEEE 802.3af and 802.3at (PoE+), and also provide Cisco prestandard the cable. The plugs and caps protect the module ports and cables from contamination and ambient light.

Cisco Catalyst 1000 Series Switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classifying, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Primary QoS features include: To access an advanced PoE planning tool, use the Cisco Power Calculator available on Cisco.com at this URL: http://tools.cisco.com/cpc/launch.jsp None of the switch models can be deployed outside of the wiring closet. These switches can only be deployed indoors. Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP. without a value, the time delay appears in the running configuration file with an explicit timer value of 4 minutes.Cisco Auto SmartPorts enables automatic configuration of switch ports as devices connect to the switch with settings optimized for the device type, resulting in zero-touch port-policy provisioning. See the switch software configuration guide for network configuration concepts and examples of using the switch to create inside the chassis, which can result in system malfunction. You must install this equipment in an environment as free from mm) holes at each of the two mounting locations. Insert the supplied 0.5 in. (12.7 mm) number-8 Phillips wood screws Cisco AutoConfig determines the level of network access provided to an endpoint based on the type of device. This feature also permits hard binding between the end device and the interface.

RJ-45 ports and SFP-module slots have port LEDs. These LEDs, as a group or individually, provide information about the switch Ensure that power is removed from the switch, and disconnect all cables and connectors from the front panel of the switch. Regulatory Compliance and Safety Information—Cisco Catalyst 1000 Series Switches 24-Dec-2019 (PDF - 5 MB)BPDU Guard to shut down Spanning Tree PortFast-enabled interfaces when BPDUs are received, to avoid accidental topology loops. that provide entry-level enterprise-class accesss switching for retail, hospitality and branch offices as well as small and When installing or replacing the unit, the ground connection must always be made first and disconnected last. Statement 1046 of RX (received data) is reversed. Normally, one differential signal includes "+" and "-", and RX+ connects to TX+, RX- connects

This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through The member switch with the higher priority value retains its member number. The other member switch has a new member number. The group member number (1 to 8) identifies each member in a group. This number also determines the interface-level configuration The USB Type A port provides access to external USB flash devices (also known as thumb drives or USB keys).Field Notices• Field Notice: FN - 72250 - Cisco SUDI Certificate Expires When Registered to a PKI and Used to Configure Certain Functionalities on Some Catalyst Switching Platforms - Workaround Provided 22-Nov-2021 Cisco Catalyst 1000 Series Switches support both IEEE 802.3af PoE and IEEE 802.3at PoE+ (up to 30W per port) to deliver a lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet ® and Catalyst wireless access points, or other standards-compliant PoE and PoE+ end devices. PoE removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.