Drayton 123042 Digistat +3RF & Receiver, White

Product Information

The Green Premium eco-mark stands for complete, transparent, and easily available information about products The Digistat qualifies as one of the additional measures required when replacing a boiler. In fact it qualifies both as a Smart Control and as Load Compensation. Which Digistats are being replaced? 2290B No, The Digistat+2 has superior programming functions, which allow for greater temperature control. When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money.

Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company. The Digistat remembers the last BOOST so if you always use the same parameters just press the O button once. Simple! Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: The Digistat+3RF also offers a range of programmable features, allowing users to set different temperature schedules for different times of the day or week. This can help to maximize comfort and energy savings by ensuring that the heating system is only operating when needed.Our Green Premium eco-mark encompasses a broad range of environmental criteria, meeting and exceeding international regulations and industry standards:

The TRV is liquid filled this gives a fast response to temperature and provides a greater temperature accuracy. This range of valves and actuators are now obsolete. Your only option is to drain down the system and fit ZA 5/6 zone valve. If the valve is in the ‘Heating’ only position when the room thermostat becomes satisfied, then the valve will remain energised consuming some power and may be warm to touch. This is normal. Programmers Manual thermosta:This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons.

Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners? In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode? This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. In terms of compatibility, the Digistat+3RF can be used with a variety of heating systems, including gas, oil, and electric. It is also compatible with both combi boilers and zone valve systems. Such flexibility makes it suitable for a wide range of applications in various types of buildings.

These settings appear in the installer menu and it is important to select the setting for your heat source: gas boiler (default), oil boiler, heat pump, or electric heating

Interact

One notable feature of the Digistat+3RF is its wireless capabilities. The thermostat can communicate wirelessly with the receiver unit, allowing for greater flexibility in terms of where the thermostat can be placed within a room. This can be particularly useful in situations where the optimal location for temperature control differs from the location of the heating system. When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat). Reset the Digistat thermostat by going into the setting menu, selecting the Inst03 menu (installer settings) and then rSEt20 to reset to factory settings. Then remove the batteries.

These batteries are factory fitted and not designed to be user replaceable. Unauthorised removal of the battery could damage the unit. TRVsMy Digistat +2/3 appears to switch off before my set point is reached and sometimes remains on after my set point is reached, is this normal? The thermostat is not communicating with the receiver. Replace the batteries in the thermostat. Re-commission the 2 units. Reset the Receiver by pressing the button for about 15 seconds until you see a red light followed by flashing orange/green which shows it is in pairing mode. The 15, 10 or 8mm angled body is bi directional as denoted by the double-headed arrow on the valve body. All other bodies are flow directional as indicated by the single headed arrow head on the valve body. There are known issues using Bluetooth with some later Apple devices. However the RETRY button should allow you to pair your Digistat within a few attempts.