Lithofin KF Cement Residue Remover, 1 Litre

Product Information

Removes stubborn cement and mortar residues from all types of porous and non-porous tiles How to use Biostrip Concrete Remover Universally usable after tile laying, during fabrication, for cleaning facades and wherever ceramic tiles and stone must be thoroughly cleaned. Softens the residue left by jointing compounds and grouts, making removal from the surface of the paving much easier. Lithofin KF Cement Residue Remover is a highly active cleaning concentrate based on a special composition of acids and supporting agents. It is nearly odourless and does not develop any vapours.

Please Note: always test the product in an inconspicuous area prior to use. Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes. Please Note: not suitable for polished and finely honed limestone and marble as well as engineered stone.Lithofin KF Cement Residue Remover dissolves organic deposits such as cement and mortar residues, residues of flexible grouting materials, efflorescence, rust and calcium deposits. The dirt can then be completely removed from the surface. This time-tested combination has proven to be the ideal product for many cleaning requirements of the professional user. Allow the NCC Cement, Grout & Salts Residue Remover solution to work and react for around one hour at 20°C, do not allow to dry out. After one hour, or if it starts to dry out, re-apply and this time leave and allow to work for around half a day to a day, approximately 12 to 24 hours, then pressure hose / jet wash off with clean water. Safe to use around plants and metals. This product is fully biodegradable and is one of the safest acid-based cleaners on the market. With a powerful but fume free formula, this product is safe to use indoors as well as outdoors. An acid replacement cleaning solution that helps to remove cement, grout and salt residues. Suitable for porcelain and all unpolished natural stone. Does not aggravate or affect naturally occurring iron deposits in natural stones.

Lithofin cement away effortlessly removes surface residues such as mortar and cement, efflorescence, encrusted and engrained dirt, rust as well as calcium and limescale deposits. Dilute Lithofin cement away up to 1:20 with water and apply it to the wet surface. Allow the product to work briefly, then rinse with plenty of clear water. Allow the solution to work and react for around 10-15 minutes at 20°C, do not allow to dry out by re-applying the solution as required whilst scrubbing the surface, then pressure hose / jet wash off with clean water. Ordinary cleaning won’t effectively remove grout haze. Help is at hand though thanks to low-cost specialist products such as Fila Instant Grout Remover that can make light work of removing any grout haze on the surface of your new tiles in your bathroom and kitchen.The contained surfactants are biologically degradable according to EU-regulations. Free of phosphates. Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system. Allow to dry again and then give the surfaces a final treatment with a more dilute solution of NCC Cement, Grout & Salts Residue Remover, this time diluted 1 to 5 with clean water, leave for a further 12 to 24 hours and finally rinse thoroughly with clean water by appropriate hose / jet washing.