3.5mm Stereo Female to 2-Male Y-Splitter Audio Cable 2M, Ancable 1/8" Female to 2 Dual 1/8" Male Aux Mic Splitter Jack Cable for Speaker, Headphones, PC, Laptop, Aluminum Connector

Product Information

However, you may also find people using Y adapter cables. But what is a Y adapter cable and why use one? However, a great way to reduce subwoofer hum caused by RF on the line is to use a “shielded” subwoofer cable. 5. RCA Adapter May Gather Dirt If you are using an AV receiver with bass management, it may only have one (mono) sub out connector. consolidating connectors (feeding signals from two output connectors to a multi-pole input connector, keeping the signals separate); [5]

In general, most receivers come equipped with a single sub output while most powered subwoofers come equipped with left & right inputs.

Order Approval

The split occurs either as a zip cable or with a small box that hides the split which then finishes with two connectors at the other end. What Is A Y Cable Used For? Next, you need to connect both L and R inputs on your sub using each end of the Y splitter. Other Ways To Connect Your Subwoofer The fact is, in most cases, it will make very little if any, discernible difference unless you are using a stereo signal. There are many ways to connect a subwoofer to a receiver. This includes using RCA cables, subwoofer cables, and even wireless. If you use an RCA adapter and leave one of the RCA inputs open, then dirt may get clogged in overtime. 6. Some Subwoofers May Need A Y Splitter Cable

You would then wire the RCA cables from the preamp outs to both sub inputs. This will then cause the stereo summing to occur within the subwoofer. However, there are a few benefits to using a Y cable including increased dB levels, better frequency separation, better bass response on some subs, etc. In general, using a subwoofer cable helps to ensure optimal performance. What Is a Y Adapter Cable? Moreover, sometimes the power coming from the receiver or preamp isn’t set high enough for the sub’s amp to sense that it needs to turn on. Auto-on is used to prevent this problem as well. It is rather easy to find a RCA cable at your local home department store or just lying around your house.

send and return (outbound signal on one leg of the "Y"; inbound signal on the other; signals kept separate). [9] [10] Since both inputs are driven, you will get more input signal when the amp sums the two inputs together. As its name suggests, a Y cable has three ends, just like the letter Y. It has one common end and two other ends. In terms of Y splitter cables offering better bass quality, this may or may not work for your subwoofer. Robjohns, Hugh (January 2013). "Lewitt Audio DTP640 REX". Sound on Sound. A 1.5m Y-cable is supplied with the mic ... to convert the five-pin connection into two standard three-pin XLR connectors, each with labelled cable sleeves to identify which provides the dynamic element signal, and which the capacitor element.