tesa Powerstrips® Curtain Hooks - Self-Adhesive Curtain Hooks - Removable and Reusable - Up to 1 kg Load - 1 x 4 Pieces - White

Product Information

You can use tension rods or adhesive hooks to hang curtains without drilling the wall. Q: What size curtain rod do I need for command hook? Ideally, you want to go with an adjustable tension rod, as it needs to be slightly longer than the window width to add a little bit of pressure. You want to insert the tension rod and see if it all works, then take it down and hang the curtains. It’s actually one of the best ways to hang curtains. Adhesive Hooks

How to Hang Curtains with Command Hooks Depending on the kind of paint you’re using, the paint may or may not need to cure. After they have finished drying, which should only take 15 to 20 minutes, the majority of spray paints are prepared for use. But in addition to a drying period, many interior wall paints also include a curing time. Examine the paint can’s label. Follow these instructions on how to hang curtains with command hooks. Get all the supplies together first. Then, clean a rectangular area that now extends 3 to 6 inches (7.6 to 15.2 cm) on either side of the frame and 4 to 6 inches (10 to 15 cm) above it. To do this, dab a soft cloth or paper towel with rubbing alcohol. Next, use the command hooks with sufficient force to ensure proper adhesion to the cleaned area. Attach the curtain rod to the Command Hooks to complete this. After that, simply hang your curtains from the rod. This technique offers a simple and damage-free way to hang curtains in your living area. The hooks are prepared for usage once the paint has dried and sealed. Since they are not frequently used, there is no need to seal them. Sealing the hooks could actually damage any metallic surfaces. Don’t remove the hook itself. Only the rectangle or oval to which the hook is fastened should be clipped. The real hooked portion will show up against the curtain rod if you paint the complete hook to match your wall. By leaving the original color on the hooked portion, you can assist it in merging into the rod. Cut a length of masking tape, and then wrap it around your Command hook’s hooked portion. Reaching the rectangle or oval to which the hook is fastened will cause you to stop. This is How to Hang Curtains with Command Hooks. 3: Apply paint primer made for plastic surfaces to the hook.The curtain can now be hung from the rod. The kind of curtain you’re using will determine how you do this. For instance, while some curtains simply glide onto the rod, others require the use of curtain rings or tabs to keep them in place. This is How to Hang Curtains with Command Hooks. How to Hang Curtains with Command Hooks: Painting Command Hooks 1: Wipe the hook down with rubbing alcohol. When using command hooks to hang curtains, you’ll want to choose a curtain rod that matches the width of your window or the space you want to cover. Measure the width of your window or the area where you want the curtains to hang and select a curtain rod that extends to that width. Make sure the rod is compatible with the command hooks you plan to use and fits securely within the hook’s dimensions. Q: How do you hang curtains without a curtain rod? Plus, you get to opt for curtains that might not originally be on your mind. The alternative hanging methods open up some clever ideas and you will appreciate the way everything comes together. It’s a creative option and one that you will like quite a bit, since it’s different and still very rewarding. Hanging Net Curtains on UPVC Windows without a Drill On the other side of the window, you will require another hook. Install a third hook in the centre, between the two outside hooks, if the curtain rod is large and/or heavy. Hanging the curtain rod should wait till later. 5: Allow the hooks to adhere to the wall for an hour.

Is it possible to hang net curtains on the UPVC windows without drilling? Absolutely, in fact you will find a variety of different options according to your needs. It’s important to study every option as you try to figure out which is the right approach. With that in mind, here you have some of the best approaches to focus on. Tension Rods That also lowers the cost of hanging net curtains, which is always a plus. It makes a lot of sense to use this approach especially if you don’t want to spend a lot of money. Adhesive hooks are excellent if you have heavy curtains. Ideally, these hooks can hold up to 16 pounds each, so even the heavier curtains will work just fine. Normally you need 2 adhesive hooks for every pair of curtains that you want to hang up. The way you add them is via cutting a right angle from cardboard, and then you align it with the window corner. If you can’t locate any Command hooks for curtain rods, buy the biggest one you can find with the highest weight capacity. No matter how many hooks are used, the aggregate weight of the curtain and rod cannot be greater than the weight value of ONE hook. Make sure the hook portion can accommodate the rod.

This item is sold and dispatched by a Range Plus Partner

As of my knowledge cutoff in September 2021, Command strips are designed to hold various weights depending on the specific product and size. Generally, the heaviest weight capacity for Command strips ranges from 5 to 16 pounds (2.3 to 7.3 kilograms) per strip. How to Hang Curtains with Command Hooks. There are some brands that create curtain rods which tap behind the wood trim of your window. Then you will be able to install the curtain with ease. It’s actually a very convenient system and it works incredibly well. It might require a bit of adjustment based on your window size, but for the most part it’s really convenient and simple to use. Primer comes in brush-on and spray-on varieties. Make careful to operate in a well-ventilated location and cover your work surface with a layer of newspaper if you’re using the spray-on variety. Before usage, shake the can and hold it a few centimeters or inches away from the surface. Before continuing, allow the paint to dry. This is How to Hang Curtains with Command Hooks.

hold two hooks. For curtains broader than the frame to offer enough support, place them 3 to 6 inches (7.6 to 15.2 cm) outside the frame. The glue will bond to the wall during this time. If you hang the curtain rod before the hour is up out of impatience, the hooks will come out. 6: Hook up the curtain rod to the supportsThese instructions will help you how to hang curtains with Command Hooks securely, evenly, and without causing any wall damage. 4: If the hooks’ tops are excessively lengthy, cut them down. Where you placed the pencil marks on the wall, place your Command hook there. Use a saw, dremel, or bolt cutters to trim the top of the hook if it is in the way and rubbing against the ceiling, crown, or molding. Push the pencil through the mark, this will mark the wall. Turn the cardboard over and then you will be able to install the adhesive hook.

Command strips can be strong enough for lightweight curtains but may not support heavier curtains securely. Follow weight limits and consider traditional curtain rods for heavier curtains. Q: How can I hang curtains without drilling the wall? You also get to add an amazing visual appeal to your home this way. It’s simpler and more convenient, while still bringing in extraordinary results. You get to style your home the way you want, without having to deal with drilling or anything like that.Make sure the hook is positioned properly. The tip of the hooked portion should curve upward while pointing downward. Why should you hang curtains without drilling holes? There are many reasons why you may want to go down that route. First, it’s a very simple way to hang curtains and you can do it yourself without calling a professional. Add the curtain rod on the adhesive hooks and see if it all holds well. A bit of trial and error might be needed here. However, if you made the right measurements, you should be just fine. Still, it’s important to test out everything before you install the curtains. Hanging Heavy Curtains without Nails Make sure to pull the tape away from the hook in a straight upward motion. You run the danger of chipping the paint if you drag it across the painted portion of the hook. If there are any paint chips, fill them in with little extra paint and a small, pointed brush. This is How to Hang Curtains with Command Hooks. 6: Give the paint time to dry if necessary. Tension rods allow you to hang net curtains pretty easily and you don’t have to rely on drilling. What you need to do here is to measure from one side of the window to the other and then buy a tension rod that will fit. Keep in mind that this method is good for lighter and smaller curtains, not large ones.