Hornby R530 00 Gauge Pylon Kit,Multicolor,Small

Product Information

Unable to locate one in the United States, I came across HyperFlight and found the exact color combination I was looking for. The ‘Equaliser’ was developed for a local club competition to provide a pylon racer airframe and power set-up that was the same, providing a ‘equal’ platform to let the pilot shine! The rules are based around the Club 2000 i/c class and makes for a robust fun sport using a model with a 3536 / 1400 motor 8 x 6 propeller, 4's Lipo battery and the rpm limiting esc. To launch you just hold it in one hand, apply full power, hold with nose up a few degrees and let go. I need to complete phase 1 of the Tower Bible drawings, plus clean up all my own photos (got a few more types to come, including PL7 DDT and what may be PL4 DD2, although there is another four-crossarm DD type buried here on one of the pages that is neither PL4 nor in the Tower Bible).

Somewhere here there is something like L2 D40EC with what did appear to be extended middle crossarms. Also the fuse front is quite bulbous and when we fitted a prop for the photo shoot the blades would not fold completely when using either GM 30 mm or VM Pro 30 mm spinners. This document may accidentally refer to trade names and trademarks, which are owned by national or international companies, but which are unknown by me.

A proper L16/L55 gallery is due at some stage on my L16/L55 page, once I have done all the photo clean-up to accommodate the output from my irreplaceable, battered old camera.

I have built it with no side or downthrust but it does climb under power so would have benefitted from a little downthrust. I did a survey of some in the field near Hartford and Stalybridge some years for my project to identify the tower designs as the set of drawings for PL towers is missing the Single circuit tower drawings. Not suitable for children under 36 months it contains small parts which can present a choking hazard and some components have functional sharp points and edges.Nexus Models as many of you know can supply almost anything for building or maintaining a model aeroplane and now we are the sole UK suppliers for the E2K Flashed ESC speed controllers. I am changing the way the wing is mounted with two cap screws a couple of inches back from the LE and another two at the rear. There are several I can think of on the line that now runs from Runcorn down towards Crewe via Winsford then on towards Stafford although the southern part is largely now gone and I think used to go to Buildwas power station.