MICROJIG GRR-Ripper DVC-538K2 Match Fit Dovetail Clamps, Yellow/Green

Product Information

Continue reading for an explanation of the individual values and you can also see a test report that was done on one of our RVO Horizon 60 OTAs. Modell 3" bars and clamps - for Losmandy / Astro Physics (large) / Celestron (large) (Base width of the bar's prism: 76 mm, equals 3".

Again, these are measured by the interferometer when we take measurements of the optical surface after adjustment. The big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5 allow to install on the Skywatcher AZ-EQ5 mount telescopes with Vixen and Losmandy type dovetail bars. Use these clamps to create customizable clamping tables and for attaching table extensions, sub fences, stop blocks, hold downs, and more to your machinery and work tables. Versatile Capability: With a 7-inch clamp capacity and a deep 2-1/2-inch throat depth, the MatchFit Ratchet Clamp AP broadens your project possibilities, accommodating various sizes and types of workpieces. And now, with the launch of the MatchFit Ratchet Clamp AP by Microjig, it’s time to bring your craftsmanship into the future.The PLUS dovetail clamp with 1 Kg counterweight can be connected to any Vixen or Losmandy style dovetail bar for a proper weight balance, when you can't have a perfect weight balance moving the telescope in its support rings. The bits they supply leave a channel that is not sharp and needs no sanding, if set at the correct depth. Use Dovetail Hardware to make stops and hold-downs that move freely, and tighten down anywhere you can route a groove. DIY Dovetail Tracks: With the MatchFit system, you can route your dovetail clamp tracks using a dovetail bit.

Within the interferometer is a calibrated laser that is pointed through the optical test surface, then onto a high quality reference sphere, then back through the test subject then to an internal camera which gives us the measurement on the screen.Offers a new means of integrating adjustable clamping into a jig securely and out of the way of blades and bits. With any standard 1/2” 14-degree dovetail router bit, you can create your own clamp tracks, eliminating the need for expensive aluminum tracks. Powerful Yet Gentle: Boasting a formidable 595 lb clamping force, the MatchFit Ratchet Clamp AP ensures an extraordinary grip without causing any damage to your materials, courtesy of its No-Mar clamp pad.

From this, we can adjust the position of the test optic and the reference sphere to obtain a perfectly calibrated system. I have never used a track before, and thought that this would be a good way to line up router-cut dados. Hardware Pack you can create a variety of sleds, jigs and fixtures with hold downs and stops that can move freely and lock down where needed anywhere you can.With any standard 1/2” 14-degree dovetail router bit, you can create your own tracks, eliminating the need for expensive aluminum tracks.

I have a question about the Matchfit clamps and Festool/Makita track: can these clamps replace the dedicated track clamps used to hold down the track? You can create a variety of sleds, jigs and fixtures with hold-downs and stops with this Dovetail Track Hardware. Of course you can also subscribe to our Newsletter to stay informed about new products and releases, special offers and much more. The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance). was looking at a t slot cutting router bit, but the depth needed would be too deep - planing on usual 3/4 material, and these need more to have enough timber above the slot to hold a regular track clamp.The Observatory version of PLUS dovetail clamps is 280mm long and it comes with 4 locking blocks to safely lock even large telescopes. The clamping arm of the MATCHFIT dovetail screw clamp inserts into matching grooves which you can mill according to your needs with the dovetail cutter No. Speed up your workflow with the quick-release trigger, a vital feature of the MatchFit Ratchet Clamp AP. com, the Sell on Etsy app, and the Etsy app, as well as the electricity that powers Etsy’s global offices and employees working remotely from home in the US.