Grip-It Assorted Plasterboard Fixings - (32 Pieces)

Product Information

The Gripit Assorted Kit contains 32 mixed Gripit plasterboard fixings, and all the relevant screws and bolts. Our Undercutting Tool is specially designed to create a recess for the Gripit wings to unfold in plasterboard thicker than 15mm (e. Our Undercutting Tool is specially designed to create a recess for the Gripit wings to unfold if installing on top of a dab of plasterboard adhesive. Rhinofix toggle fixing is used for securing items to hollow plasterboard walls and has been tested for tensile strength with Hydrajaws, the world leader in tensions testing equipment.

Providing an instant solution to an enduring problem, Gripit has been welcomed by tradespeople and DIYers alike. These fixings need the resistance of a hook or bracket against the screw or bolt head to pull the wings towards the rear of the plasterboard and provide a secure fit. MarXman is a unique tool designed so that with one push it quickly, easily and clearly marks almost any surface. In addition to itsunique wings,much of the strength of Gripit fixings is due to the large surface area that is in contact with the plasterboard. Use Gripit Blue plasterboard fixings for seriously heavy stuff, this fixing will hold the heaviest of domestic heating boilers - no trouble.

Many DIYershad been trying to hang a curtain rails in bedrooms and across the home but struggled to find a plasterboard fixing that could do the job, despite numerous attempts. This type of installation causes immense stress on the plasterboard and tends to result in the plasterboard failing.

Wings create a vice-like grip on the back of the plasterboard and distribute weight more effectively than conventional plugs or fixings. Each pen contains 250+ bursts of removable fluorescent green pigment, and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. Use Gripit Red for very heavy stuff, such as the largest shelves – and all the books and ornaments to fill it! The only recommended TV Brackets that are compatible with Gripit products or kits are ‘fixed’ wall brackets which allow no movement of the TV whatsoever.Turn the centre of the Gripit a quarter rotation anti-clockwise with a screwdriver to close the wings. Gripit presents as a simple method of fixing heavy stuff to plasterboard through its ease of use and high performance compared to similar products on the market. Please Note: This fixing is not suitable for Vertical Radiators, for Vertical Radiators Rhinofix is suitable. The unique gripping wings allow Gripit to be installed in walls with extremely limited cavity space. Please note: Gripits are not suitable for Cantilever, extendable, "pull out" or full motion TV Brackets.

The Gripit TV Kit contains 4 x Gripit Blue plasterboard fixings, 4 x locking washers, 4 x flat washers, 4 x M8x20mm bolts, 1 x 25mm Gripit Flat Drill Bit! Then use your fingers, a flathead screwdriver or similar to gently pry the edge of the Gripit collar out of the wall. You will need a diamond hole cutter sized correctly for your fixing diameter and a suitable saw/file to cut four small slots in the tile (these are to accommodate the Gripit's anti-rotation fins).If you can't see an opening in the cavity, firstly check you have drilled the whole way through the plasterboard. Works on all surfaces including brick, wood, metal, pebbledash, ceramic, porcelain – MarXman works on just about everything! Use Gripit Red plasterboard fixings for very heavy stuff, such as the largest shelves - and all the books and ornaments to fill it!