Thermoweb Foil Deco 6-inch x 12-inch, Gold

Product Information

I’ve been creating gold foil prints for around 18 months and it has been a bit of a steep learning curve as I have found gold foil printing can be a bit of a black art! When using helium, inflate the Deco Bubble as well as ALL balloons inside the Deco Bubble with helium. I must say there is a huge difference as the laminators were giving me patchy and inconsistent results. I haven’t had much of a problem with it sticking where there isn’t toner, never more than just a few little specks, if anything.

Deco Foil – CSDS Vinyl Deco Foil – CSDS Vinyl

My foil came with the clear transfer sheets but in my experience the scrap paper allows more heat to get to the foil, which allows it to stick to the toner better. Heidi Swapp also has planner dividers , tags , and stickers that you can use with the foil instead of printing your own. I was just wondering if you only want a section of your print foiled, would you put the print back through the printer after foiling?A lot of people have success with the Brother but I have found that on smaller areas it just doesn’t foil as consistently. If you need to make a design with foiled and unfoiled areas then you will need to print the unfoiled areas on an inkjet printer first and then print the areas for foiling on a laser printer. When the laser print gets passed through a foiling machine (which is hot inside) the toner heats up and melts slightly (because it’s plastic) and makes the foil from the transfer sheet stick to it - a bit like glue. You may not modify, copy, reproduce, republish, upload, post, transmit, or distribute in any way material contained on this site. If you are using an actual foiling machine (like a Minc) then you may have better luck with the transfer sheets since that’s what they are made for and the foiling machines get to a higher temperature than laminators do.

Thermoweb Deco Foil Toner Sheets 8.5-inch X 11-inch 3/Package Thermoweb Deco Foil Toner Sheets 8.5-inch X 11-inch 3/Package

With regards to paper thickness – be careful with very thick paper in laser printers as they can’t cope with it as well as inkjets. I’ve seen a lot of cool foil cards lately and I really wanted to try out the deco foiling sheets and I’m a little in love with how easy and cute this project came out. I receive a small commission at no cost to you when you make a purchase using my links (purple text).If this is the case then the foil can’t distinguish between the bits you want foiled and the bits you want to be left unfoiled. e. don’t overlap sheets when you don’t have a long enough sheet – you will end up with black lines on your print. This could be from the laminator not being hot enough, or can also be a result of the paper you are using (the more grit the paper has, the less foil that will stick smoothly). What I *think* this achieves is that it changes the amount of heat and pressure applied to the material being foiled. Stretchy plastic Deco Bubble Balloons are non-oxidizing and long-lasting - making them ideal for both indoor and outdoor decor.

Foil Deco - Etsy UK

e. if you are printing an 8x10” printout then create your image as a 16x20” and print it at an 8x10” size. If you have any questions, you are always welcome to contact me at lauren {at} mysomethingbeautifullife {dot} com. They are meant to add a colorful pop of metallic or satin finish to a bunch of different types of craft projects. Tissue paper is unlikely to work properly unless you are not planning on applying toner with a printer e.

Gold foil printing is done with the help of a laser printer, some gold foil transfer sheets and a laminator or a gold foiling machine. Over inflating or under inflating Bubbles can decrease float times, so follow package instructions to inflate properly and achieve the best float times. The reason for running it through more than once is to continue to heat the foil and have it adhere to the paper better. Don’t be tempted to print in coloured toner because for some reason foil does not adhere as well to coloured toner as it does to black. And I am sure there is yet more to learn as I still constantly get flawed prints… so I am on a mission to get them as perfect as possible!

Bubble Balloon™ - Qualatex

The minc also comes with a transfer folder which is ace for putting your prints through the machine. Once it has come out the other side wait a minute for it to cool down and then gently peel off the foil. Small designs go all the way through the laminator faster, therefore they are still hotter when they go in the 2nd/3rd times. Any advice, tips, or suggestions relating to ADHD or mental health are not intended to replace professional medical advice or treatment.The smooth papers tend to work MUCH better (Mohawk if you can find it, or HP Premium Choice Laser Jet Paper is another good one I’ve found more recently). I went for the minc machine as from what I’d read this was the best one on the market (that wasn’t industrial size) however there are other machines available.