Downy Ball, Fabic Softener Dispenser (Pack of 3),Blue,22.86 x 22.86 x 7.62 cm; 226.8 Grams

Product Information

Once you’ve removed the fabric softener compartment, clean it thoroughly in warm, soapy water to remove any residue. Repeated exposure over multiple washes can also cause the material to weaken, meaning your clothes will wear out faster and need to be replaced more frequently. This flushes the softener out the top of the compartment and runs it down the sides and into the drum. If you don’t fill this drawer up, but you select a ‘pre-wash’ cycle, your clothes will just go through a typical ‘main wash’ cycle, and they may not come out as clean as you’d like them to. Step 1: Check the user manual: Consult your washing machine’s user manual for specific guidance on accessing and removing the fabric softener dispenser.

When to Add Fabric Softener If There’s No Dispenser

Look for a section that provides instructions on removing and cleaning the detergent tray or dispenser compartments.If you cram too many clothes into your washing machine, the fabric softener can get trapped between the clothes and therefore any residue will not have space to drain from the dispenser during the rinse cycle. Step 5: Dry and reattach: Ensure the compartment is completely dry before reattaching it back into the detergent tray. For example, maybe the detergent you are using is very concentrated, so you'll only want to use a small amount. Softener runs down the inside of the agitator or infusor and out the holes near the mid-point of the agitator or base of the infusor.

Fabric Softener Dispenser? (Step by Step) How to Unclog the Fabric Softener Dispenser? (Step by Step)

In this video you can clearly see the difference between the old and new dispenser drawer tops, and that the effectiveness of these jets on the old one is affected by mould.With prolonged and regular usage of your washer, there is always a likelihood of clogging in several parts such as the vent, drain, dispensers, etc. Inspect the Detergent Tray: Open the detergent tray or drawer on the top or front of your washing machine. Reconnect the tub filler hose, screwing the valves back to the body of the machine - and then reconnect the electrical connectors. That doesn’t mean the machine is faulty though, just that it’s not been levelled when it was installed. With the dispenser removed from the washing machine, look above where the softener would sit, there should be a small line of holes.