EVAPO-RUST® C700 Rust Remover, 946 ml

Product Information

My background is industrial, but I had been playing with chemicals for different projects during the three years beforehand. The primary difference between Evapo-Rust® and the acid based treatments is that Evapo-Rust® will not harm or weaken the metal. However, large pieces of metal with thick layers of rust will take anywhere between 8 and 24 hours; I suggest leaving them to sit an extra 12 hours just to be on the safe side.

That's more to do with the jaws being stuck in their bores or the ring gear/ jaw teeth being gunked up or rusted together.Maybe you just needed to hold it a little bit more on the metal thing or you used an expired product. For heavier rust, cover the soaked towel with the plastic wrap and tape the wrap down to prevent moisture from escaping. With Evapo-Rust®, sometimes a wiping with a dry cloth or a more rigorous buffing can remove the dark coloring. absolutely easy usage of rust remover, you don't need any special instruments, skills or special conditions. If the metal part is big, take some sponge and soak the rusting surface, then pour water and dry it.

With the help of sponge or some soft cloth put the liquid onto the rusting spot - don't take too much of Evapo.

The recommended way, and the most effective way, of using Evapo-Rust® is through soaking the rusted surface.

Your privacy is important to Leading Solvents and we are committed to respecting your privacy and the confidentiality of your personal data.The removal of the rust (iron oxide) reduces the proportion of iron to carbon, leaving a higher concentration of carbon on the outer surface. If the chuck is apart I'd prefer to manually clean everything, because although it's probably shot I don't want to take a chance with hydrogen embrittlement on the threaded ring.