About this deal
Stretched out under the bath trying to stretch the rubber washer over the pipe didn't seem 'easy' hence I didn't want to stretch it too far and find out I should have done it some other way.
FloPlast WC08 Universal Compression Waste Straight Coupler FloPlast WC08 Universal Compression Waste Straight Coupler
I guess firstly, to remove the joint i think i need to saw off the pipe at the joint which would result in a smaller pipe out of the wall. Solvent weld fit runs have the most extended lifespan of all waste systems, including push-fit and compression systems. My outside waste pipe from the kitchen sink has a 90degree joint that has cracked and causing the waste to leak before reaching the main drain. I naively thought a simple replacement would be suitable however since found that the joint is solvent weld and has an outside diameter of 43mm rather the standard 40mm.Pipe should come out of wall fairly easily, could use multifit joiner T28M inside to connect from old pipe to new 40mm pipe. In contrast, waste pipe fittings made from polypropylene and polyethene will not break down or bond when exposed to solvents. Make sure you're working with plastic pipes that are affected by solvents and will bond when welding. Compression style couplings usually cope with a larger size of pipe as well as allowing for a slight variation of angle joint. To view the purposes they believe they have legitimate interest for, or to object to this data processing use the vendor list link below.
Solvent Weld White 40mm (43mm) Waste Pipe Coupling Solvent Weld White 40mm (43mm) Waste Pipe Coupling
Secondly, i just cannot find a standard 90 degree joint that has a suitable diameter of 43mm standard.We and our partners use data for Personalised ads and content, ad and content measurement, audience insights and product development.
FloPlast Overflow Waste Reducer White 21.5-40mm - Screwfix FloPlast Overflow Waste Reducer White 21.5-40mm - Screwfix
Solvent weld a 43mm waste pipe to traps from the sink, shower, washer or more, to create secure wastage systems. The plumber fitted a new boss and pipe rununder the floor, surfacing underneath the bath, all in grey solvent weld pipe, which according to the 45 degree elbow (has stamped on it) is 43mm pipe.Unfortunately this is the section of solvent weld pipe that is poking up out the floor that the plumber put in, I'll just have to struggle it on, perhaps some kind of lubricant could be used? The 14° White Soil Pan Connector for use when replacing an angled outlet pan with a horizontal outlet pan to 110mm soil systems.