Vinyl by Skullcandy True Wireless Bluetooth Earbuds with Mic, 14 Hours of Total Battery Life, Hands Free Calling and Charging Case, Sweat and Water Resistant - Black

Product Information

To reset your Skullcandy Mod Earbuds, which feature a sleek and straightforward design with the control button integrated into the earpiece, follow these uncomplicated steps: The problem often stems from the earbuds not aligning properly with the case’s charging pins. This misalignment might be due to improperly positioned ear tips or dirt and debris obstructing the charging pins; navigate to step number 7 if this is your issue. Sometimes, resetting the device (as explained in Step 3) can also help in this circumstance. 2. Re-Sync Your Earbuds Correctly Remove the Vinyl earbuds from the charging case and manually power OFF by pressing the button on BOTH earbuds for 4 seconds Remove both earbuds from the case and wait for a voice prompt indicating that your earbuds are powered on. Device Setup: Remove your Skullcandy earbuds from your Bluetooth-paired devices. Then turn off your device’s Bluetooth.

Take To Charge Skullcandy Earbuds? How Long Does It Take To Charge Skullcandy Earbuds?

First, navigate to your device’s Bluetooth settings and remove “RAIL” from the list of paired devices. After doing so, make sure to switch off the Bluetooth feature on your device. Access Audio Settings: Navigate to the sound or audio settings of the device that your headphones are connected to. Connectivity Problems: Software errors often cause difficulties in pairing your earbuds, resulting in audio interruptions or complete loss of sound. A reset eliminates these problems, restoring proper functionality. To ensure a smooth reset process for your Skullcandy wireless earbuds, it’s essential to start by unpairing them from your device. This prevents any interference during the reset. Follow these steps to unpair your Skullcandy earbuds:

Should you buy the Skullcandy Grind Fuel?

While your earbuds are turned on, simultaneously press the Volume + and – keys until you hear two beeps and observe the LEDs flashing blue and red. Just as you did to switch them off, touch and hold each earbud now, but this time, keep holding them for at least 10 seconds. You will see a series of flashing lights, and then eventually both earbuds will show solid blue and then turn off.

Vinyl by Skullcandy True Wireless Bluetooth Earbuds - Grey

Now, focus on the right earbud. Press and hold its control button for a duration of 3 seconds. You’ll hear a tone signifying a reset, and the right bud should then flash purple three times.Initiating Re-Sync Mode: With the earbuds powered on (regardless of whether they are connected to a device), press the button on each earbud four times. To reset your Skullcandy Vinyl Earbuds, which feature a control button spanning the earpiece’s surface, follow these steps: Locate the control button on the earpiece, which is distinguishable by the embossed Skullcandy logo. Audio settings, if misconfigured, can cause one earbud to malfunction or remain silent, especially due to modes like “mono”. The steps below will guide you in ensuring your device’s configurations are set correctly. Both buds will automatically power ON and the LEDs will simultaneously flash BLUE while they sync to each other.

Skullcandy Grind Fuel review - SoundGuys Skullcandy Grind Fuel review - SoundGuys

To reset your Skullcandy Vert Wireless Earbuds, which feature a unique design with a large dial as the primary control button, follow these steps: Resetting your Skullcandy Grind Earbuds is a straightforward process, much like the Sesh earbuds. Just like with the Sesh, the control button is located on the earpiece and is identifiable by the Skullcandy logo. To reset your earbuds, follow these steps:Touch and hold the rear of each of your Skullcandy Sesh earbuds for at least 4 seconds to turn them off.