Teltonika RUT955 LTE 4G Router

Product Information

While holding the reset button, plug the power cable into the router. Continue holding the button for another 4 seconds. Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher service Fixed group settings saving by removing deprecated ":section" routes in Administration -> User Settings -> System Users

Or to simply include everything in the entire WebUI ( if this path is combined with Read action: Deny, users from that group will not be able to login to the WebUI): The shortest amount of time (in seconds) between two triggers. If the input is triggered more than once in a time period shorter than the value specified in this field, the device will react to the first trigger. Mode determines what options and configurations are shown. In Basic mode only the essential configurations are shown. In Advanced mode there is greater freedom to configure and access more options. Lastly, you can configure Conditions based on date and time. Date/time Conditions can be configured based on:Improved file/section deletion logic: now files are also deleted after deleting a related config section Output pin. The state of the selected output will be set to "High" during the time interval defined in the fields below. Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP Force intervals to accept last day of month as valid option if selected day doesn't exist in ongoing month. x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)

Note: Firmware version RUT9_R_00.07.01 released on 2021.11.18 was removed due to an issue with keep settings functionality. Delay and time parameters can be used together. For example, if delay is 10, time is 5, action is on, then 10 seconds after the execution of the command, the output will switch to on (or stay in on state if it was already that way), then after 5 more seconds it will switch to off state. In this case the overall command execution time is 15 seconds. Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929 Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0

The General Configuration section is used to enable the Scheduler itself. Created instances won't work unless this option is turned on. Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP x digital input (0 – 3 V), 1 x digital galvanically isolated input (0 – 30 V), 1 x analog input (0 – 24 V), 1 x Digital non-isolated input (on 4 pin power connector) Action configuration depends on the selected action 'Type'. Each Action can have one or multiple user-defined Conditions assigned to it. Actions that have Conditions assigned to them are executed only if the Conditions are met (a trigger occurrence is not enough to set off these actions). Assigning to Actions is optional. The number of seconds after which the broker should send a PING message to the client if no other messages have been exchanged in that time