Hasbro NERF N-Strike Recon CS-6

Product Information

Alpha Trooper CS-18 • Deploy CS-6 • Longshot CS-6 • LongStrike CS-6 • Raider Rapid Fire CS-35 • Rayven CS-18 • Recon CS-6 • Stampede ECS Make sure the blaster is de-primed by pulling the trigger and pushing the priming slide all the way forward. Step 2: Remove screws. Be sure to make note of each screw's placement, because sizes differ. It is helpful to place the screws on the table in their original positions relevant to an outline of the blaster. There are a total of 15 screws. (Pic. 2) Hasbro Inc. Recalls to Repair Nerf Blasters; Child's Skin Can Get Caught in Plunger of the Toy (Article). Hasbro. Archived from the original on 2008-10-12. The air restrictor (AR) slows down the flow of air from the plunger to the dart. This device serves to reduce the blaster's power and prevent the plunger from slamming into the plunger tubing at full speed, drastically reducing the noise generated during firing.

Removing air restrictors ("AR's") is a common modification for air-and-spring-powered Nerf blasters. We generally do not recommend removing the AR's, as the performance increase gained from such an undertaking is negligible at best, except in terms of projectile speed, which is nearly meaningless during a foam dart event. The primary reason to remove AR's would be if the user wished to shoot stefans out of their blaster, in which case the dart peg inside of the bolt would need to be removed. Tip: Before we move on, it's important to understand which parts of the tubing assembly are ok to hit with the drill and which are not. If you shake the plunger tube, you should hear some parts rattling around. The follow picture shows exactly what's inside the plunger tube: (Pic. 3) One can dual wield the Recon by using the tactical rails on the slide to prime each blaster simultaneously. This drastically reduces rate of fire, though.The Recon CS-6 features a reverse plunger plunger system. Because of this, it is usually disliked in modding communities. The 2008 version of the blaster notably has a shorter plunger tube, due to the 2008 product recall and redesign of the plunger. Familiarize yourself with the internal mechanism of the blaster. A reference photo has been provided in picture eight. A modded blaster can shoot further and with more intensity compared to FOF (fresh out of factory) blasters. It can give you the upper hand in your next battle. A modification or “mod” is anything you do to your blaster that changes its looks, form, or functionality. Doing a custom paint job, adding your own accessories and parts, and working on the internals to increase power are all considered mods. Step 2: Remove the plunger from the plunger tube and gently pry the O-ring out of its groove with a flat head screwdriver. Be careful not to damage the O-ring if you plan on reusing it. (Pic. 2)

Today I am going the show you how to do basic all-around beginner--intermediate modifications in the Nerf Recon CS-6 The Recon MKII was inspired by the N-Strike Retaliator [2], making it a successor of sorts. In part, and perhaps due to its name, it may also be considered a successor to the N-Strike Recon CS-6. The Recon has had four direct successors: the 2012 N-Strike Elite Retaliator, the 2015 N-Strike Modulus Recon MKII, the 2019 N-Strike Elite Recon CQ-12, and the 2021 N-Strike Modulus Recon MKIII. The O-ring seal on the plunger tubing makes sure that the air compressed by the plunger assembly and spring does not leak out during compression. Some blasters come with an excellent O-ring seal, while others come with undersized or loose O-rings. Improving this seal is an easy mod that can add a few extra feet to your shots.Step 2: Use gloves to hold the plunger tube and drill from the end that has the O-ring. It will take considerable pressure to get the bit to catch the plastic. Wearing a glove will prevent you from suffering a burn on your hand, should the bit catch the tubing and start to spin. (Pic. 4) Remove the two screws in the top of the priming slide, as in picture five. Do not remove the slide pieces yet.

In the first part of this 'ible I will show you how to do some mods for beginner modders, people who are doing something like this for the first time.

Recommendations

Pry out the grey piece and its spring from the inside of the magazine release button, taking care not to let the spring fly away and get lost. This method is demonstrated in pictures two, three, and four. Keep these pieces, as they will need to be replaced.

The pre-recall Recon had an exposed plunger, which had the word "ARMED" written on the side and served as a priming indicator. Step 1: Remove the bolt sled and plunger from the blaster. Unpin the plunger assembly from the bolt sled using a nail, small screwdriver, or punch. You can do this by inserting the nail, screwdriver, or punch into the hole that houses the retention pin and apply pressure. (Pic. 1-2)Alpha Trooper CS-18 • Barrel Break IX-2 • Barricade RV-10 • Deploy CS-6 • LongStrike CS-6 • Rapid Fire AS-20 • Spectre REV-5 • Stampede ECS