About this deal
Fixed an issue when using the T2-R with a Pioneer VSX-920-K AV receiver that caused the audio to be lost.
When the box is turned on, observe that the Hard Drive ready message is displayed briefly on the screen during booting. Please allow time to finish Loading Hard Drive & Recording Features, as the time taken to complete depends on the data stored on the HDD.If and when it doesn't finish loading (after 10min) only then try the power reset option
How to Update
You’ll always be entertained with 70 TV channels, 15 HD channels and 25+ radio stations from Freeview. Simply connect to your rooftop aerial (indoor aerials are unreliable and not recommended) Split recordings (normally movies in 2 parts) now show the time after the date so the first part can be easily identified. Further improvements to come. The Automatic Service Update (ASU) previously took place every time the T2-R entered standby. It now takes place only once overnight.
Connect by HDMI and experience stunning HD with Dolby Digital Plus surround sound. The T2-R even upscales SD channels for enhanced viewing.
When RF Loop Through in Standby was enabled in the System section of Settings, disturbances in the output could be observed for a few minutes after entering standby. During initial setup the Confirm Your PIN step has been updated to make it clearer you need to re-enter your PIN. (1.09) The system can now be restarted in the System Settings menu and by pressing: Red - 0 - Red - Standby. Split recordings are now listed in their folder from oldest at the top to newest at the bottom. These are almost always movies in two parts, so the first part will be shown first followed by the second part. OPTICAL: Connect to an AV Receiver or external sound system for Dolby Digital surround sound (when supported)