Dell U2715H 27-Inch Widescreen IPS LED Monitor

Product Information

A: Yes, when using DUCCS software with the UltraSharp, you will always want to determine if you wish to save to the Calibration 1 or Calibration 2 preset. A: DUCCS can save the color calibration settings to one of two settings stored in the display. This allows you to have two different color settings that are easily selected by the display’s menu. Someone who worked in both print and video mediums could choose to use AdobeRGB and save to Calibration 1 setting for print work, and then choose Rec. 709, saving to Calibration 2 settings for video projects. graphics card LUT from the profilation of the screen which was pleasing. You can use our settings and

Here they have factory calibrated the default 'Standard' preset mode to a 2.2 gamma, 6500k white point and with a A: The DUCCS software is based on i1Profiler technology. But please use the DUCCS software to access the hardware color controls to achieve best results. Use of i1Profiler is possible, but not optimal. The display’s viewing angles were also hugely impressive. Even facing the screen almost side-on produced only the smallest alteration in the level of contrast, although we found its vertical viewing angles were slightly narrower. In portrait mode, horizontal viewing angles were narrower still, but its vertical viewing angles were excellent, as even standing up to read resulted in very little change in contrast. A: Although we would like it if you owned more than one DELL branded display, you can use the DUCCS software with a non-DELL display.

Superior image quality and an impressive range of inputs make this one of the best monitors of 2013

colorimeter with a central point on the screen calibrated to 120 cd/m 2. Measurements for colour temperature (white point) were taken using Also consider is the viewing angle each display is using. LCD displays do not have the same color response off-angle, and it is likely that when using two screens you will sit in front of one, or between the two resulting in a different viewing angle for each display.

The Advanced mode uses the Automatic Display Calibration feature and do an in-depth setting of the hardware color controls in the display before displaying the colors needed to create a profile. Using the Advanced mode gives an excellent result, but will take a longer time. Graphics professionals and color critical users find many industry specific option choices available in this mode. here how uniform the brightness and colour temperature was across the screen, as well as identify any

of any overshoot artefacts in this mode which was pleasing. When you switch to the 'fast' setting, the A: One benefit of the Advanced mode is the ability to save information at any point in the workflow. Many people would choose to save their measurement file prior to moving to the final stage of creating the display profile. Being able to review a measurement file can be helpful if you encounter an error in creating a profile. You can then reload that saved measurement file and see if a change in profile creation settings allows you to complete the profile. This saves considerable time vs. having to redo the entire measurement process. our response time measurement article for a full explanation of the testing methodology and reported A: This is caused by comparing two displays of different manufacturers, often with different display quality levels. A: By using a larger number of color values for measurement, the software has the ability to make a more accurate profile. However not all images may show a visual difference or improvement by choosing a larger number of patch values. We would recommend that you start with the Small patch set, to have a baseline for evaluation, should you choose to try the other larger patch sets. Yes, a larger patch set takes more time to measure.

style stands of some older UltraSharp models including the U2713HM, and comes in an all-silver colour. A: If you are using two displays, setting them to the same luminance level is critical if you wish to see similar color results. Display color temperature changes with the luminance level set, so establishing a common luminance setting is an important step in making displays look more similar. Q: The DUCCS software looks similar to i1Profiler software from X-Rite. Can I use i1Profiler software instead?A: The Automatic Display Control (ADC) feature can take a number of minutes with the UltraSharp, due to the complete control of the hardware offered. The current version of the software does not have a cancel button available until the ADC feature completes. We would recommend that you allow the ADC process to complete to avoid having the display end up in an unstable color condition. Q: In the Licensing area on the home screen, the last four icons have a red question mark. What is wrong?

A: Ambient light levels can be expressed in different units of measurement. Lx refers to Lux, and would be a unit of measurement that is used in video or scientific environments. Cd/m2 refers to Candela per square meter, and is a more commonly used unit of measurement in the photographic and printing industries.A: GB LED is the specific illumination hardware that is used by the UltraSharp. This is automatically selected when the software recognizes the UltraSharp is in use. Many other displays use other lighting technologies, such as White LED. GB LED illumination offers many technical advantages in rendering more accurate color on-screen. A: The recent versions of the MacOS have restricted the access to the System Level Library folder. Saving your profile to the User Level is correct. An expert user could change this setting, but we advise against it.