Dell Thunderbolt Dock WD19TBS 180W

Product Information

Ultimate connectivity: Thunderbolt™ connectivity makes it easier than ever to deliver power, data, audio and video as well as connect to system peripherals, no matter what system you use. Plus, with support for up to three displays, including a single 5K and dual 4K monitors, you can connect to everything you need. When disabled, the Thunderbolt Technology feature is disabled, and any connected Thunderbolt adapter devices are not available in preboot or within the operating system. HBR3 (HBR3 x4 lanes + HBR3 x1 - 32.4 Gbps) For Precision 7530/7540/7730/7740 with discrete graphics card Connectivity:multipule portsincludings audio, video, power and data as well as connections to system peripherals.

How to Use and Troubleshoot Dell Thunderbolt Docking Station

User Authorization: Approval is required for any new devices that are connected to the Thunderbolt port. Energize your workload: Get more done, faster, with Dell ExpressCharge Boost, a feature that provides up to a 35% charge in just 20 minutes. Power your day: Dell ExpressCharge allows you to charge up to 80% in one hour, making it the most efficient way to manage the workday.

Overall Take

When it comes to ports, advances in technology have made things a little complicated. You’ll see both USB-A and USB-C ports advertised, as well as the rating of USB 3 and USB 2. These are standards applied to data transfers, and both USB-C and USB 3 are newer. You’ll recognize USB-C by its smaller port size, as seen on newer computers and mobile devices. USB-A is the type you’ve seen for years, with a larger port on both the devices and the cables you plug into them. Note: To learn more about updating the BIOS on a Dell computer, see the Dell knowledgebase article Dell BIOS Updates. Open the Windows Display Properties and go to Multiple Displays control to set the display to the extended mode. DisplayPort Only: Automatically connect to DisplayPort devices only. No Thunderbolt adapter or PCIe devices are allowed to connect. If only one monitor is shown, while the other is not, go to Windows Display Properties, and under Multiple Displays, select the output for the second monitor.

Dell Thunderbolt Dock – WD19TBS | Drivers Support for Dell Thunderbolt Dock – WD19TBS | Drivers

Reset the monitor to Factory Defaults. See the User Guide of your monitor for more information about how to reset the monitor to factory defaults. Verify if the device is detected in Windows Device Manager and that the correct device drivers are installed. For compatibility, you’ll need to make sure your chosen Thunderbolt will work with the devices you have. Information in a flash: With data transfer speeds of up to 40 Gbps for faster data transfer, you can stay productive when connected to all your devices.When enabled, this setting allows PCIe devices that are connected through a Thunderbolt adapter (that is PCIe devices behind the Thunderbolt adapter) to perform the PCIe device’s UEFI Option ROMs (if present) during preboot. Power your connections:optimize workspace with DellExpressCharge allowing a chatge up to 80% in one hour. Data transfer at super fast speed at 40GB per second. HBR3 is DP 1.4 (8.1 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 6.5 Gbps per lane. Secure Connect: The Thunderbolt adapter port allows connection to devices that have been configured with a shared key.

DELL THUNDERBOLT™ DOCK – WD19TBS Jump-start your productivity.

External monitors require a certain amount of bandwidth to work properly. Monitors with higher resolution require more bandwidth.HBR2 is DP 1.2 (5.4 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 4.3 Gbps per lane User Authorization - Allow User Notification devices at a minimum - the CM requests connection approval from the host SW and autoapproval may be given based on the Unique ID of the connecting device. Secure Connect - Allow one-time saved key devices at a minimum - the CM requests connection approval from the host SW and autoapproval is only given if the host challenge to the device is acceptable. For additional help, learn How to Set up Multiple Monitors or How to Troubleshoot Multiple Monitor Issues.