Candy Grand'O Vita GVSH9A2DE80 9Kg Heat Pump Tumble Dryer, 14 Programmes, Sensor Dry - White

Product Information

Remove the condenser unit and clean out any lint that’s trapped inside – You can use a high pressure washer for the best results The Fault codes above may apply to some or all of the following tumble dryer models from Candy and could apply to other models that use the same electronics and/or software. We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.

You should then inspect each of the cables that go from the control board down to the thermostats and the heating element. Make sure that there are no breaks or kinks in the wires.It’s also a concern for safety if the lint filter overflows as it can cause a fire if the machine doesn’t cope with the excess lint. The fluff can make it through to the heating element at the rear which then burns it out. Inspect the control board and wiring

If the thermostat can’t, be pushed in then it means that it hasn’t tripped, and you will have to locate all of the other thermostats so you can test them.Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used. This post will describe where you can find the reset button of different models of Candy clothes dryers and what to do if a reset doesn’t work. Always be sure to unplug the power cord before starting. Candy Grand O’Vita Tumble Dryer Reset Button Location The Candy brand has multiple models of tumble dryers to choose from, with the Candy Grand O’Vita model being a popular one.

Please also note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular Candy tumble dryermodel as all codes apply to a wide range of appliances and not normally any one specific model. Applies To Candy Tumble Dryer Models This fault should automatically reset itself but if it does not then the thermal cut out is likely to be faulty. We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours. If you find a faulty thermostat, then you can match up the correct spare part with a spare parts retailer by using the model number of your dryer. Clean out the condenser unitSensor Dry - The machine will automatically stop the cycle when it detects that the load is dry. This avoids the cycle continuing until the timer ends, saving time, energy and money Before you start to inspect your dryer or carry out any repair work, it’s important that you make sure that it’s isolated from the electrical supply.