Joined in 2023 
82 
63 About this deal
The primary brake tester must be used unless the vehicle is unsuitable due to its drive configuration, transmission type or braking system. If this is the case, a decelerometer or gradient test may be appropriate. A gradient test must only be carried out if the parking brake cannot be tested using the primary brake tester or decelerometer. This will usually only be necessary on certain all-wheel drive vehicles with electronic parking brakes where no vehicle technical information is available.
best practise guide to brake fluid testing A full best practise guide to brake fluid testing
Brake fluid is essential for ensuring your brakes work as they should. It transmits the force applied when your foot pushes the brake pedal to the brake calipers or wheel cylinders, which then applies the brakes and slows down or stops the vehicle. Brake fluid also lubricates the hydraulic system and helps prevent corrosion, so it’s important to keep it sufficiently topped up. Drive the vehicle on a level road at a steady speed of approximately 20mph (32kph) and progressively apply the parking brake to maximum. Some brake fluid testers have better features than others that enable ease of use and more accurate results. For instance, one may have LED lights to show the corresponding percentage of water, while others show the percentage on a screen. One LED fluid tester pen may come with a free battery, while in others, you have to buy it separately. 4. Price For Classes 3 and 4 use the weight shown by the brake test equipment. Otherwise, take the weight from a weight data chart or some other reliable source.
Sign up for special offer emails
The process is very similar to that of front and rear disc brakes, but prior to starting the bleeding process it is essential to ensure the correct manual adjustment (if present) is carried out to ensure the clearance is correct according to manufacturers’ specifications.
6802 Brake Fluid Boiling Point Tester - Laser Tools 6802 Brake Fluid Boiling Point Tester - Laser Tools
Tech is a great thing – in most cases because many tools that were once the preserve of the experts are easily accessible to all enthusiastic car owners. A particular example is the DIY brake fluid tools. Typically, we ought to maintain a good brake fluid condition for efficiency in the braking system.A vehicle with an ULW up to and including 3,050kg with a reservoir coupled direct to the induction manifold or a reservoir integral in a servo unit, is not necessarily required to be fitted with a warning device.
MOT inspection manual: cars and passenger vehicles - 1
On each axle which has a secondary brake fitted, run the rollers and gradually apply the secondary brake keeping any “hold-on” button or trigger disengaged the whole time, watching how the braking effort for each wheel increases. Vehicles with a single line braking system must meet the following minimum secondary brake efficiency requirements: Vehicle typeNote: On goods vehicles presented with a ‘Ministry’ plate (VTG6 or VTG6T) then the information displayed on that plate will always override the information displayed on the Manufacturer’s plate.
Great Deal 
New Comment