ANYCUBIC Upgraded Water Washable 3D Printer Resin, 405nm LCD UV-Curing Photopolymer Resin with High Precision and Low Shrinkage for 8K Capable LCD/DLP/SLA 3D Printing(Clear,500g)

Product Information

He said he hasn’t had any failures yet on his Elegoo Mars 2 Pro, even though he’s been printing non-stop since he got the printer 2 months ago. How Do You Dispose of Water Washable Resin?

ELEGOO Water Washable Resin Review | 3D Print Beginner ELEGOO Water Washable Resin Review | 3D Print Beginner

In fast printing mode, it is recommended to set the layer height to 0.1mm, and the other settings are: Water washable resin has extraordinary significance for resin 3D printing, it is also a technological innovation and progress. It allows us to produce high quality prints without the hassle of cleaning the prints with chemical solvents. Compare with normal resins, water washable resin has some different characteristics in terms of water solubility, UV stability and resolution, which will affect printing quality, surface smoothness, printing speed, etc. Let’s take a closer look at the 3 main characteristics of washable resin. The intensity of mercury lamp or LED light source is 5-10mW/m2, and the duration is no more than 1 hour (self-regulation). Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then take it out and drained; Anycubic Wash and Cure machine s are suggested to ensure a better effect. Environmentally friendly choice: Water replaces the need for chemicals and is a more sustainable and environmentally friendly option.While the sabre pommel was probably not supported well enough, I can’t justify the layer shifts that occurred on the top. To ensure the ideal performance of the curable material it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended: In normal printing mode, it is recommended to set the layer height to 0.05mm, and the other settings Water washable resin and normal resin usually have similar exposure times so you shouldn’t have to make adjustments for either type of resin.

Anycubic Water-Wash Resin+ 0.5KG – ANYCUBIC-UK

Suggested operating temperature is 18-35℃, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60℃). Anycubic, however, offers more choice with their Resin+, castable and non-castable resins for professionals, Flexible Tough resin, and resins specializing in translucence, making them the clear winner in material variety. Performance The second recommendation did not bring any new information. I always clean the inside of the prints using a syringe where I inject water (or IPA) inside the model. This is done multiple times to ensure good cleaning. Water washable resin has a lower consistency, better fluidity, and lower viscosity than normal resin. During the printing process, water washable resin usually provide a smooth and uniform print, effectively improving the surface finish of models and showing intricate details. Secondly, the low viscosity and good fluidity allow water-washed resins to use shorter exposure times, which also means increased printing speed. UV Stability: In general, the curing time for curing stations and UV nail lamps is similar, but curing stations are generally considered to be the most stable and convenient option. On the other hand, sunlight is the least reliable, taking the longest time to cure resin prints. The following table is a simple guideline.

This is linked largely to their toxicity. Unpleasant smells are generally how our bodies warn us to not get too close (or worse, consume) something that would do us no favors. The same goes for resins. Some people do still choose to clean water washable resin prints with alcohol, so that’s still an option if you choose. They say it makes the prints a lot easier to wash than normal resin. To dispose of water washable resin and the contaminated water, take the container and cure it with a UV light or by leaving it in the sun. You then want to filter out this cured resin solution and let it slowly separate out the water. You can then take the cured resin, throw it away and dump the water. Many users talk about how great this resin is once you dial in the settings properly. I wrote an article about dialing in resin settings called How to Calibrate Resin 3D Prints – Testing for Resin Exposure.