Napier Airgun Pull Through Kit

Product Information

The Napier Airgun Pull Through Kit comes complete with 100 Power pull through patches, ensuring you'll have plenty on hand for multiple cleanings. Our kit also includes 1 x 120ml Power Airgun oil Pump Spray, which contains exactly the same amount of active ingredient as the 200ml Aerosol version. Convenient and Portable

Napier Power Pull Through Kit – Redbeck Shooting Supplies

Bore pastes are grey to begin with, so that will account for some of the discolouration on the used patches, but the results were nevertheless incredible.A secondary benefit of bore paste is its deep cleaning ability, and some shooters like to use it as an occasional cleaning product in addition to its intended use of prepping a new bore. Bore paste is meant to be applied to either a patch or brush, and rodded down a barrel. I decided to put my money where my mouth is and try it in a number of my own air rifles, but using a pull-through rather than a rod. When using any type of liquid near the breech of an airgun, less is definitely more, and I was careful to use a minimal amount with each pass of the patch. A: How often you should clean your air rifle will depend on how often you use it. If you never use it, you won’t have any real need to clean it (provided that it’s stored correctly). A well-made air rifle won’t need to be cleaned each time it’s used, and if anything, cleaning too often can actually risk damaging the barrel. All of that is to say that you only need to clean your air rifle if you notice a decline in accuracy, or if you want to experiment with a new kind of pellet. Even then, many people recommend never cleaning an air rifle at all. Q: What kind of cleaning kit do I need for my air rifle? Next, grab your pull-through tool and carefully pass it through the barrel from the muzzle end. If your air rifle has a moderator, be sure to align the cable correctly. Pro tip: using a drink straw can make this step even easier! Or simply remove the moderator.

Napier Pull-Thru Cleaning Kit - Airguns of Arizona Napier Pull-Thru Cleaning Kit - Airguns of Arizona

A: No, you should not use WD-40 to clean your air rifle. While WD-40 is great for cleaning other things, it’s not designed for cleaning firearms and can actually damage the seals on your air rifle. Q: How do I clean my air rifle scope? Use just the right amount of compound or solvent – you don’t want it seeping into internal areas such as the transfer port The easiest way to insert a pull-through is directly into the barrel – this BSA Ultra XL makes the job easy

A brush can be attached to the rod to agitate deposits in the bore. Traditionalbristles are made of phosphor bronze, an alloy of copper, but many shooters prefer to use brushes with nylon bristles, which are less likely to cause any damage. When using any type of bore-cleaning or conditioning product, less is more – and that’s especially so with abrasives like bore paste Want to achieve the ultimate in accuracy? The secret is simple: regular cleaning and relubrication of your barrel.

Airgun Cleaning Kit Napier Pull Through - A. Branthwaite Airgun Cleaning Kit Napier Pull Through - A. Branthwaite

US firm KG Industries makes some fairly high-tech gun care products, one of which is KG2 Bore Polish. Of all the bore pastes I’ve ever used, this is probably the most gentle, lending itself to repeat applications. A: The best way to clean your air rifle pellets is with warm, soapy water. This will get rid of any dust and debris. When dried, they should be lubricated with oil to prevent oxidation. Cleaning air rifle pellets may improve accuracy and prevent fouling. Q: Can I use WD-40 to clean my air rifle? As mentioned above, I’m not a fan of using cleaning rods with airguns, but bore paste can be applied using a pull-through. It won’t be as thorough, but you can repeat the process as many times as you like until you’re happy with the result. Drinking straw: A straw gives the pull-though a head start any time you’re trying to clean a barrel that doesn’t offer direct access to the muzzle, such as a shrouded barrel with a non-removable end cap. But how often is "regular"? While it may vary depending on your specific circumstances, we recommend giving your barrel a clean and re-lube every 150 shots for best results. This will help keep your barrel in tip-top condition, ensuring top-notch accuracy every time you shoot.While plenty of people will clean their airguns with a rod, two things really do go against this method. Rods are supposed to be used with something called a bore guide which keeps the rod central to the bore as it travels down the barrel. Bore guides are intended to be used with powder-burners where the bolt can be removed and the bore guide inserted in its place. With the Napier Pull through tool and easy-to-follow instructions, you'll have everything you need to get your air rifle clean and functioning at its best. Plus, the kit comes with a convenient component case, making it easy to store and transport. Perfect Choice for Airgun Enthusiasts