SONOFF Universal Zigbee 3.0 USB Dongle Plus Gateway with Antenna for Home Assistant, Open HAB etc.

Product Information

Does anyone know if it is possible to turn off zigbee and just have thread on SkyConnect? I already have my zigbee network working perfectly so I am not keen on introducing another zigbee signal into the mix. When a ZigBee device restarts (e.g. a bulb is powered on), it will send an announcement to advise the coordinator that it is on the network and this will allow the binding to rediscover devices that have become lost. Battery devices often have a button that may also perform this function. # Install Codes If that radio was a combined Z-Wave and Zigbee radio, like the HUSBZB-1 adapter, then only the Zigbee radio part of it was reset. Confirm that the Zigbee Coordinator radio adapter is properly connected and select Submit.

Review of Sonoff ZIGBEE 3.0 USB DONGLE PLUS - Reddit Review of Sonoff ZIGBEE 3.0 USB DONGLE PLUS - Reddit

Note that it is possible to dynamically add command descriptions for specific warning/squawk types to a warning_device channel by configuring the channel configuration property zigbee_iaswd_commandOptions, using String parameters of the form label=>commandString, where label is the label provided to UIs to render, e.g., buttons for the provided command options. Digi XBee Series 2 (S2) modules (Note! This first have to be flashed with Zigbee Coordinator API firmware) Value: the update period in seconds. 0 means "never update". In the UI, a drop down list is shown, the options from that list are shown in te table below, with their equivalent values that can be put in a config file. UINote that ZHA only supports connecting a single dedicated Zigbee Coordinator radio adapter or module with a single Zigbee network and that the Zigbee Coordinator cannot already be connected or used by any other application. Any devices that are or have previously been connected to another Zigbee implementation will also need to first be reset to their factory default settings before they can be paired/joined to ZHA, please see each device manufacturer’s documentation. Elelabs Zigbee USB Adapters ELU012 ((EFR32MG1B) and EZBUSBA (EM357) or Elelabs Zigbee Raspberry Pi Shields ELR022 (EFR32MG1B) and EZBPIS (EM357) Please note that, technically, you are not bound to using the values from the table. But if you use an arbitrary number of seconds, not corresponding to one of the predefined periods, it might not be possible to display the configured value correctly in the UI. # Network Size (zigbee_networksize) When reporting issues, please provide the following information in addition to information requested by issue template: Flashing instructions open in new window or see "Flashing CC1352/CC2652/CC2538 based adapters" below

Flashing the CC2531 USB stick | Zigbee2MQTT Flashing the CC2531 USB stick | Zigbee2MQTT

Currently the openHAB main UI doesn't support the firmware management system, so this must be performed using the console. # When things don't appear to be working The binding will attempt to automatically detect new devices, giving them a type based on the information they report, and will read their supported clusters to define the supported channels. # Thing TypesIf your new radio does not appear or you need to reboot after plugging in new hardware, you can resume the migration after a reboot: under Network Settings, select Re-configure the current radio and choose your new radio. To help resolve any kinks or compatibility problems, report bugs as issues with debug logs. Please note the current limitations and follow the instructions in this troubleshooting section. Limitations Home Assistant’s ZHA integration supports all standard Zigbee device types. It should be compatible with most Zigbee devices as long as they fully conform to the official ZCL (Zigbee Cluster Library) specifications defined by the CSA (Connectivity Standards Alliance, formerly the Zigbee Alliance). There is therefore no official compatibility list of devices that will work out-of-the-box with the ZHA integration.