Sentinel - X800 Fast Acting Cleaner 1L, targeted central heating system cleaning inside an hour, restores system efficiency by targeting corrosion debris, ideal for hot and cold systems

Product Information

Sentinel X800 Jetflo is a powerful, highly active cleaning agent for use in central heating systems. It is specifically designed for use in conjunction with power flushing equipment and will remove objectionable iron oxide and calcium based deposits from heat exchangers, radiators and pipe work. Its unique composition allows Sentinel X800 Jetflo to act as a penetrating dispersant under neutral pH conditions, eliminating the need to clean with conventional acids and the problems associated with them. The formulation also contains agents to help protect metal from corrosion. It's not. Tony is being silly! Apart from Malic Acid and colouring agents. they don't tell us what's in it.

leave Sentinel X800 in system for extended period? - DIYnot OK to leave Sentinel X800 in system for extended period? - DIYnot

For details of how to dose using the Rapid-Dose format of this product, please watch the Rapid-Dose video. DS40 is fine for everything apart from Primatic cylinder or an aluminium heat exchanger in the boiler. X800 is a 1 hour wonder product,I prefer X400 which is slower working product, had more success with X400 here,noticed an improvement with the radiators in a few hours,than with the X800.

🍪 Privacy & Transparency

The circulation pump of the system can be used to circulate the cleaning solution; however equipment which provides a more rapid circulation can provide a more effective clean. When using an external cleaning rig, the product can be dosed directly to the buffer tank of the rig (follow equipment manufacturer’s instructions). Lifetime protection for heating and hot water systems with the best practice process of Clean, Protect, Maintain. I ham building up to having my boiler changed by taking some old rads off and flushing out all the sludge etc. I have just dosed the system with Sentinel X800 Jetflo and I was wondering how long I can leave this in the system. I realise that it will have done whatever it is going to do in a couple of days but is it OK to leave it in the system for a couple of months which is the earliest that the boiler will be changed? Or should I drain the system in a couplel of days, flush it and add inhibitor? For large or heavily fouled commercial systems, the cleaning period may have to be extended and the cleaning temperature elevated. The new chemical innovations in Sentinel X800 Cleaner include reducing agents to dissolve adhering corrosion crusts and settled debris, and powerful complexing agents that help retain dissolved corrosion debris and scale in solution. As with all Sentinel products, X800 Cleaner is non-toxic, biodegradable and completely harmless to the environment.

Sentinel X800 Fast Acting Cleaner into a system? How do I get Sentinel X800 Fast Acting Cleaner into a system?

Its formulation also contains agents to ensure the protection of system metals against corrosion during the cleaning as well as preparing the installation for the addition of Sentinel X100 Inhibitor. I went upstairs and started bleeding the radiators there too which caused water to come out of the bleed valves on the radiators downstairs that I had left openi have done the 1 hour with ch at full blast as well. a lot of power flusher are not better then ch pumps anyway" To clean an older system in accordance with BS 7593 it is recommended that this product is used withpowerflushing equipment. In this scenario, administer Sentinel X800 Fast Acting Cleaner via thepowerflushing equipment, following theequipment manufacturer's instructions. Alternatively, circulate theproduct (preferably at normal operating temperature, with all valves open and the pump turned tomaximum flow) for a minimum period of 1 hour or until satisfactory performance is restored. Thank you all for your advice, I have tried to do what I can to resolve the heating issues I have been having. So just to paint the picture I will layout the mistakes I have made as somethings that should have been obvious simply wasn’t to me. Sentinel X800 Fast Acting Cleaner should be used as a 1% solution in mains water to remove typical levels of deposits of iron oxide and calcium carbonate. Where systems are badly fouled, a higher concentration (up to 10%) is recommended.