7pcs 35mm Stainless Steel Heat Gun Nozzles Kits for Hot Air Gun Soldering Station Nozzle Tool

Product Information

Children, animals and pregnant women shouldn’t be nearby when a heat gun is being used to strip paint, as the fumes emitted by the melting paint could be harmful. The heat gun nozzles are all top-of-the-range and make life easier in all sorts of industries including electronics, flooring, roofing and much more. When using a heat gun to strip paint, the heated air is directed on to the painted surface, helping it to soften so that it can be easily stripped off.

For Hot Air Blowing - Bosch Professional Accessories For Hot Air Blowing - Bosch Professional

Move the gun around, as holding it still in one can cause charring or burning of the wood. Hold the heat gun with one hand and use a putty knife or scraper to go along behind the gun and scrape away the loosened paint.Heat guns are electric hand tools which look and work in a similar way to hair dryers – operating a fan that pulls air into the body of the tool and drives it across an electric heating element and out through a nozzle. Heat guns are sometimes referred to as hot air guns. Heat guns should be held at an angle of approximately 45 degrees from the work and never kept in one place for more than a few seconds. As the paint begins to bubble under the heat, move the gun and strip the paint with a scraper.

Heat Gun UniversalHeat 600 (1800 W Bosch Home and Garden Heat Gun UniversalHeat 600 (1800 W

There will be some paint that will be difficult to remove as it has not been warmed sufficiently or is trapped between the grain. Don’t risk burning or discolouring the wood by using the heat gun on these little bits. Simply sand down the wood to get a great finish, or use a paint stripper which will not damage the surface. See our project on other ways to strip paint. Be Aware of Lead Paint on Older Doors, Fittings and Furniture Automatic thermal protection switches off the heating unit if motor overheats for increased protection and long lifetime The 9mm reduction nozzle delivers a hot air stream with pinpoint precision while the 14mm nozzle produces a slightly less concentrated stream, perfect for plastic welding. STEINEL Welding NozzleThe paint bubbles and blisters as the moisture and air trapped under the paint expand and force the paint to bubble. Do not burn the paint. Simply warm it until the blistering appears. The heat from the heat gun will have warmed the paint so that it is soft. It can then be scrapped away relatively easily. Electric Pressure Washers Petrol & Diesel Driven Pressure Washers Hot Pressure Washers Pressure Washer Accessories Detergents, Chemicals and Algicides Pressure Washer Spares Hoses & Accessories

GHG 23-66 Heat Gun | Bosch Professional GHG 23-66 Heat Gun | Bosch Professional

Shining shoes or boots – use a heat gun to get the perfect shine by holding it one to two feet away from freshly waxed shoes/boots. Heat the wax until it shines and melts into the pores of the leather. A haze will form on the cooling wax, so dip a clean cotton ball in water and rub the wax until the haze fades. The materials to be welded should be prepared properly and placed into position. Then you can heat the seam and feed a welding rod into the nozzle where it will be heated and applied. The heat gun is then dragged along the length of the seam to apply the plastic. STEINEL Reflector Nozzle STEINEL’s Sieve Reflector Nozzle is another kind of reflector that is used to give more even temperature and air distribution during heat shrinking. Air Compressor Filters Accessories & Consumables Air Tools and Accessories Oils & Lubricants Low Noise Compressors

Be Aware of Lead Paint on Older Doors, Fittings and Furniture

Plastic welding nozzles are used across a variety of industries and for different purposes. Flooring installers use heat guns to weld PVC in flooring seams. Plastic welding is also used in the automotive industry, facilities maintenance and prosthetics to repair plastics. Nozzles enable precise working on different jobs. For example to direct the airflow to a specific point, or to keep it away from a window. A lot of different nozzles are available on the market, and some of the most common types are shown here. STEINEL’s hinged reflector nozzle is the only adapter that gives a full 360-degree heated air flow around your substrate. Developed for the electronically controlled HG 5000 E professional hot air gun, the hinged adapter will fasten closed around your cable giving you an even air flow in every direction.

Using a Heat Gun to Remove Paint and Varnish | DIY Doctor Using a Heat Gun to Remove Paint and Varnish | DIY Doctor

More complex models have two or three heat settings or even a variable adjustment within a heat range, combined with a choice of two, three or variable speeds of air flow. Standard heat guns have just one heat setting and one fan speed and are designed mainly for paint stripping. Heat Gun Reduction Nozzle has half of the diameter of other nozzles, making it ideal for work in corners is a lot of power and when this current is pulled through the cables of an extension lead they can get warm if the lead is left coiled on the drum. When using power tools of any kind always make sure the lead is completely unwound to avoid over-heating it. Heat Gun Nozzles ExplainedGlass protector nozzle: This nozzle allows you to strip paint and varnish, etc from neat a glass pane, without warming and melting the putty or glass. It the putty is warmed it can become soft and the glass can work loose, possibly falling out. To prevent this happening this nozzle directs the heat from the gun away from the glass and on to the surface where you need it