Joined in 2023 
82 
63 About this deal
The Rest of this review focuses only on the P12 PWM PST fan, but you can expect the exact same results from the P12 PWM (as the only difference is the Daisy Chain). Interesting, I could not notice that the A-RGB and regular version of the P120 has different rotor shapes. The pricing from Arctic makes more sense then.
ARCTIC P12 Slim PWM PST - 120 mm Case Fan with PWM Sharing
The speed of P12 PWM can be adjusted using PWM signal from the motherboard. Please follow this procedure to adjust the settings on your motherboard. So overall, on the performance side, the Arctic P12's are an excellent choice for anybody that does not want any unnecessary RGB features in their build. During the development of the P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators. A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. Within all testing of all the fans, there was only ever 1°C difference between them. So, the fan is no better or worse at the specific tasks than any other fans we tested.
Page Not found
The P12 Series is pressure optimized, meaning that the Air that the P12 Fan is pushing has a higher pressure, resulting in a better passthrough if the direction it blows is restricted, like by a Radiator or Filter.
P12 PWM PST | Pressure-optimised 120 mm Fan with PWM PST - ARCTIC P12 PWM PST | Pressure-optimised 120 mm Fan with PWM PST - ARCTIC
M on Phanteks PH-F120T30: The fan that pushes boundaries For some time now, we know from the results that current, the best 120 mm... zakius on Enermax Liqmaxflo 360 – Hefty, silent and efficient the title says silent but it doesn't even appear on the 36dB(A) chart, that seems...
Technical Documents
After letting Heavyload grill the CPU, we came to the following results while the Fans were spinning at 100% PWM.
P12 PWM | Pressure-optimised 120 mm PWM Fan | ARCTIC
Even though we were perplexed that they did not manage to repeat their results, they performed excellently with 83°C on the CPU.We would have hoped that the wire would be long enough to keep the rest of the Fan wires behind the mainboard. Unfortunately, I cannot agree with this statement even now. The extra details that Noctua has often stand out more with relatively higher speeds. Whether it’s Flow Acceleration Channels, Stepped Inlet Design, a significant narrowing of the gap between the blade tips and the frame or Inner Surface Microstructures. These elements counteract the shortcomings that become stronger with increasing pressure. The fact that the NF-A12x25 gives excellent results at low speeds is largely due to the fact that the operation of the motor and blades does not create any noise, so at this level there are no such pronounced limitations as with other fans, and the NF-A12x25 fits into the same noise level at higher speeds. Conclusion: The P12 PWM PST is a good, solid built fan. With only five blades I am confident that it will run quieter than those with seven or more blades. Of course, this will depend on the speeds. The fan is perfect for the "no frills" people. I know you can't believe it, but there are some out there that just have not embraced RGB and ARGB and that is OK! However, if you wanted the fan to have a little extra pizzaz, you could always use the Akasa Digital 120mm frame with RGB LED lighting to get the bling. I was not disappointedin it, and I don't think you will be. While Benchmarking, they managed to outperform everything we own under full load and managed to keep a very good position while letting the Fans spin slower.
Great Deal 
New Comment