Enforcer II Tint Meter

Product Information

Its accuracy is not affected by humidity, thus you can use it even innot so friendly weather. It will not affect your reading!

AutoLight Plus MAGNETIC Premium Window Tint Meter

AutoLight is a portable Light Transmission Meter. The meter measures the level of light transmitted through a tinted window to determine its safety level. It is a lightweight, accurate and easy to operate tool for law enforcement officers. Some local regulations also require testing of tinted glass to ensure conformance during vehicle safety inspections. The AutoLight meter provides inspectors with accurate readings that would otherwise be impossible by simple visual inspection. According to JJF1225-2009 " Calibration Specification For Transmittance Meter of Automobile", the standard stipulates that all tint meters must meet the requirements of the CIE photopic luminosity function standard. The International Commission on Illumination published the standard value of photopic luminosity function standard V (λ) on the basis of experimental data in 1971 and was approved by the International Metrology Commission in 1972. The light sensor is usually located at the top of the screen, next to the speaker and the front camera of your device.Without water, life on earth would be impossible. Without colour, life would be gloomy and boring. It is therefore important that we maintain both diligently. With our measuring equipment and verification standards, we are safekeeping both worldwide. We’ve been pushing the boundaries water testing and colour measurement – for over 130 years. Overall, I would highly recommend the Laser Labs Enforcer II Tint Meter to anyone in the market for an accurate, reliable, and high-quality tint meter. The SC shading coefficient can be converted by the SHGC value, SC = SHGC ÷ 0.87 (or 0.889) 4.G-Value: Solar Factor or Total Solar Energy Transmittance

Tint meter - Apps on Google Play Tint meter - Apps on Google Play

Our photometers, electrochemical meters, our turbidity instruments or setups are being used in the field and in laboratories for visual and automatic measurements. By using our powders, tablets or liquid reagents, electrodes, sensors or infrared light sources our products detect impurities in drinking water, help process waste water and monitor biocides and bacteria in ground and surface water. Whether on-line directly within the industrial process or off-line with sample solutions: Our instruments help to avoid corrosions and scale in industrial plants, guarantee safe fun in the swimming pool or ensure compliance to required values.

The Inspector 2 works on all windows: roll down, front shield, rear window. When you hold both sides together it turns on. Yet, we as window tint installers are also in need of such devices. Because our job involves installing tints every day, this tool would make a great asset for us.

AutoLight Plus Premium Window Tint Meter - AutoTest Products

Comes with a Digital Tint Meter with sensor, an Operation Manual, one calibration plate, and a carrying case for protection. G-value (sometimes also called a Solar Factor or Total Solar Energy Transmittance) is the coefficient commonly used in Europe to measure the solar energy transmittance of windows. Despite having minor differences in modeling standards compared to the SHGC, the two values are effectively the same. A g-value of 1.0 represents full transmittance of all solar radiation while 0.0 represents a window with no solar energy transmittance. In practice though, most g-values will range between 0.2 and 0.7, with solar control glazing having a g-value of less than 0.5. You can select the aperture, shutter speed, ISO, and exposure compensation. Shutter speed options range from 4 minutes to 1/8000s. Aperture options range from 1.0 to 512, and ISO options range from 3 to 6400. It works on Roll down Windows only!Place it on the window and within 1 second you will have the exact measurement of the VLT. The Lumu Light Meter app boasts color temperature, illuminance, spot, ambient, and flash exposure metering. It’s handy to have around if you’re getting started with flash photography. The features of this application and hardware combo include:The device needs calibration before usage. This can be done by using the samples you receive or by calibrating via the button. Window tint meters work by shooting a beam of light from one sensor to the other through the window. The amount of light received by the sensor will be displayed and given the VLT as a percentage. The haze meter measures is deviated from the incident light more than 2.5 ° angle of transmitted light intensity as a percentage of the total transmitted light intensity, the greater the haze means that the measured material gloss, transparency and imaging degree is worse.