QitinDasen 62 Pcs Spring Wire Connectors Kit, Quick Cable Connector Terminal Block, Electrical Cable Clamp Terminal Block Connector, No Screw No Welding (50 Pcs CH2 + 12 Pcs CH3)

Product Information

Spring clamp connections simply use the pressure of a spring to press down and retain the wire in place. Spring clamps are useful in applications using small wire diameters without the need for high strength connections as well as for use in a limited working space where screwing terminals down may be difficult. Screw clamps Insulation displacement connections (IDC) are a simple and easy connection method that is achieved by pushing the wire between two sharp pieces of metal, that can break the outer sheathing to allowing a connection to be made without exposing any bare wire. Applications

Quick Connector Spring Wire Connector 100Pcs 2P CH2 + 3P CH3 Quick Connector Spring Wire Connector

Good performance: With high quality steel clamp pin of good elasticity and good conductive copper core, connectors can serve purpose well. Its quality is guaranteed. The HelaCon Easycable crimps are exclusively designed for use with solid wire up to a diameter range of 2.5 mm². Bent, stranded or fine-stranded wire conductors may not be used. Insert wires. (The wires stripped of the outer skin are all inserted into the holes. Can’t be exposed). A tight and secure fitting is indispensable for a failure-free, long-life operation. Careless work may otherwise result in damage and overheating, in the worst case causing a hazardous situation like a fire. Screwless connectors in the field of house installations are used countless times every day. Although this is routine work, it requires a lot of diligence.

Being compact in size they fit perfectly in tight spaces and can generally be used in all kinds of junction boxes either on-wall or flush-mounted. The range of push-in wire connectors is used for fast, easy and reliable connection and distribution of conductors in electrical housing applications. They are designed for use in a typical range of housing tension up to 450 volts. Convenient to use: Fast wire connection operation without drilling screw holes speeds up wiring process, quite convenient. Can be used with peace of mind.

Spring Quick Connector Wire – Antasie Spring Quick Connector Wire – Antasie

The HelaCon push-in wire connectors made of polycarbonate (PC)are used for fast, easy and reliable connection and distribution of laddersin the field of electronic installation. HelaCon Plus Mini is a sophisticated push-in wire connector for professional cable links inelectrical housing applications. High Quality material: The shell is made from high standard flame retardant engineering plastic, which is practical and has a long service life. A great choice for you.The low pushforces due to the latest double spring technology enables the use of single- and multicore conductings.

Spring Quick Connector Wire – ferristale

The range of HelaConpush-in wire connectors is used for fast, easy and reliable termination and distribution of cable and conductings in electrical housing applications. They may be used within a typical range of housing tension up to 450 volts. A huge variety of input poles allows high flexibility in application depending on the number of conductors and available space.Similar to a spring clamp, use pressure to hold a wire in place but can achieve greater clamping pressure with the use of a screw to tighten the clamp over the wire. This method of electrical connection is the most classic and industry-standard termination method. This type can accommodate a very wide range of wire sizes and provides a reliable connection. The free fixing of each double spring allows the concurrent use of various conductor cross-sections between 0.5 and 2.5 mm² within one connector without impact on the adjacent link. A typical application is lighting system, where the massive ladder from concealed cabling has to be connected to a flexible conductor for lighting. The 2/1 variant allows the looping through of the supply lines for additional devices. No matter how distinct the individual requirements are – the HelaCon wire connector series offers the best solution for every task – worldwide. Different colour codes help to easily differentiate the sizes of the push-in wire connectors. All cable entries are in a row on one side. A separate power test entry on the front guarantees safety during application, installation and maintenance. Any conductor with cross-sections between 0.5 and 2.5 mm² can be used at the same time, without impact on the adjacent junction.