Lian-Li O11 AIR MINI Black SPCC/Aluminum/Tempered Glass ATX Mini Tower Computer Case - O11AMX

Product Information

Fan mounts: 2x 120mm/140mm front, 3x 120/2x 140mm roof, 1x 120mm rear, 2x 120mm side, 2x 120mm/140mm floor. The O11 AIR MINI also accommodates AIO watercooling with enough installation space for 240mm or 280mm radiators on the top, side and bottom. Inside, as already mentioned, the well-known and proven two-chamber system is used. Here, the two chambers are separated by a wall that forms a “step”. In this step you can install a 240 mm radiator. In the bend of the partition are two openings, which are provided with gray rubber lips. Cables can be cleverly passed through here without opening the view into the second rear chamber. If time is saved on perfect cable management, this still keeps things looking tidy in the visible main chamber. Please note that whilst we endeavour to provide information as accurately as possible, there are times when components may be cosmetically different than shown due to new revisions of hardware.

Mini-ITX Aluminum Chassis Features swappable hinged glass and mesh panels Included PCIe 3.0 or PCIe 4.0 riser cable for vertically mounted GPU Supports SFX PSU and up to 160mm long ATX PSU Supports up to 325mm long radiator in certain circumstances Supports 4 storage drive mounting locations Cable management friendly with tie points and included LED/ fan hub To put this case through its cooling paces we will be using a test system consisting of an Intel Core i9-11900K, Palit RTX 3080 10GB and an SSD. This system allows us to produce a substantial amount of heat and effectively test the Lian Li O11 Air Mini‘s cooling capabilities. Microsoft for Business CouponExclusive: 20% off select Surface Pro 9 for Business + Type Cover Bundle By now, you’ve probably gathered that the O11D Mini and the new O11 Air Mini are almost entirely different cases. They’re based on the same base principles, but externally and internally they are surprisingly different. Unlike the case, Lian Li does not rely on aluminum for the frame. Instead, the manufacturer uses steel here. This benefits the stability of the case. All in all, the case makes a very good impression. Especially the workmanship leaves nothing to be desired.The mesh design on the front, top and side panels of the O11 AIR MINI have been optimized to allow maximum airflow from different sides of the case to the temperatures stable and low. The super fine mesh also acts as dust filter to avoid dust buildup inside the case.

You will have noted the floor of the case is completely empty and could easily accommodate a second radiator so our key message is that Lian Li and Der8auer have come up with a clever design that gives you plenty of options. The O11 AIR MINI comes with 2 x 140mm PWM front fans and 1 x 120mm PWM rear fan pre-installed straight out of the box. Get your system up and running faster with ease. FAN SUPPORT: (Top) 120mm X3 / 140mm X2 (Side) 120mm X2 (Bottom) 120mm X2/ 140mm X2 (Front) 120mm X2/ 140mm X2 (Rear)120 mm X1 Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital (UK) PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348. The register can be accessed through http://www.fca.org.ukThe bottom of the case even has a removable dust filter for easy cleaning. There is plenty of room for enthusiast-grade hardware in both air and AIO cooling setups. There are even several different configurations depending on your preferences. This versatility allows for up to 280mm radiators, large GPUs, tall CPU coolers and ATX motherboards. The Air Mini can do only two configurations: seven expansion slots or five expansion slots. The former supports the case’s full range of motherboard sizes, while the latter supports only micro ATX and mini ITX. The Dynamic Mini offers an additional mode, for a total of three options: seven expansion slots, five expansion slots, and three expansion slots. Panel design The power supply is mounted in the Lian Li O11 Air Mini as usual with four screws. Well thought-out by Lian Li: The power supply is slightly elevated and does not rest on the floor. This gives you the opportunity to neatly run cables underneath and thus reach the lower slots on the motherboard. Similar openings are also found on the upper edge. In the HDD/SSD case, the disks can be stored in two holders with the included screws. Once screwed tight, they can be put into the case. Practical test Lian Li has also introduced the O11 Air Mini along with several other products at its DIGITAL EXPO 2.0. Thus, the popular O11 family gets a new offshoot, which advertises with extra airflow. Whether the attempt to build a case that advertises with „mini“ and an airy design, but not lose the high demands on … (Weiterlesen...)

Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow. The second side panel is closed with an aluminum mesh panel. The two mesh strips sit directly above the PSU and HDD slots, as well as directly above the fan mount on the partition between the two chambers. In the event that fans are installed there, they will get enough air. The case only has one filter, at the bottom, and it keeps the same, not-so-pretty plastic handle as the O11D Mini. This is visible on the side, and although practical, a little unsightly.Whether you’re a casual or a hard-core gamer, Norton 360 for Gamers provides multiple layers of protection for your devices, game accounts, and digital assets.

Our team of specialists would be more than happy to assist in choosing the right system for you and to discuss upgrades or technical advice should an issue arise. Optimized Dust Management The mesh panels of O11 Air Mini are designed as dust filters and intake sufficient air into the chassis. Great case, enabling a very powerful system to be installed in a form factor that doesn't take over your desk. Once inside, you’ll spot room for up to an ATX motherboard in the main compartment, along with room for radiators and fans along the top, front, bottom and side. Two 140mm PWM fans come installed at the front intake, while the rear exhaust carries a single 120mm PWM spinner. I definitely like the look and size of this one. While I like my old (and still current) case, this one would allow me to move my newly built system from my existing floor standing ATX mid tower and place it into this one on top of my desk. No more dog hair getting into my filters. it also fits my DRP4 and a full sized ATX PSU, which is most excellent. The price is reasonable, too.Additionally, This is also where the PSU and storage are concealed. The main chamber will display your best components and this case makes cable management a breeze. Furthermore, you can install a standard ATX mainboard in the main chamber and place a tower cooler with a height of up to 170 mm on it. Furthermore, you can install graphics cards that have a maximum length of 362 millimeters. The numbers definitely impressed us.