HP USB-C/A Universal Dock G2

Product Information

Some USB 3.0 enabled PCs can exhibit issues which can be resolved by connecting your product through an external mains powered USB hub NOTE: iIf installing DisplayLinks Windows 10 driver on an Arm-based SoC platform, you can use the .INF driver or install the driver from Windows Update. It is currently not possible to install using the .EXE or .MSI versions. DisplayLink host software reads the supported modes from the display. Only resolutions reported by the monitor will be offered through the If you are using a DisplayPort to HDMI, DisplayPort to DVI, DisplayPort to VGA or HDMI to VGA cable and are having issues we recommend using an active video adapter in conjunction with a video cable What is the difference between active and passive?Active cables and adapters contain have their own built in chip which converts the video signal from say DisplayPort to HDMI, they also convert the digital DisplayPort or HDMI signal to the analogue VGA signal

This issue is however fixed, and I uninstalled the graphic drivers and installed the newest version. At first it was not working. Screen was recognized both in Windows and in the AMD software as second monitor, but still no signal. Enable “Screen Recording” to allow the DisplayLink Manager app to capture pixels and send them to your USB peripheral: Because the new permission will only be active the next time you start the application, macOS will invite you to “Quit & Reopen”. In Catalina 10.15.x please select "Quit Now". Please accept. What active adapters do you recommend?We cannot recommend one over another but we do regularly use the following in our test lab:In 1.6.0 version of DisplayLink Manager application will display this message in the Home tab when working with macOS Monterey. Using "Open Notification & Focus" hyperlink you will be taken directly to "Notification & Focus" setting in "System Preferences". The minimum supported kernel version is 3.16 and xorg version 1.16. These were provided in the 14.04.2 point release. See this link for more information: Now it doesn't work anymore. I assume it stopped working after a Windows software update as i could not open the AMD Radeon software due to a mismatch between the real driver version and the version the AMD software thought was installed. The arrangement of the displays can be changed by dragging the screens to the correct position, to reflect the physical positions of the displays on your desk. macOS supports a maximum of 4 virtual displays whatever their technology. Virtual displays are defined as displays not directly connected to the graphics card (GPU) (=not HDMI, DisplayPort or USB-C),

header with program version and a date used, followed by any warning or error found along with the message the end user would get. For most error messages, a link for more information is provided. Primary or Replace mode: The DisplayLink is the main Windows display. Replace mode extends primary mode by also disabling the laptop or tablet screen while connected to the DisplayLink device. This mode is used if wanting to use your laptop with the lid closed. it appears, if there are any errors against it?Please note any errors and report to DisplayLink Support Update the computer's BIOS/UEFI with the appropriate file from your system/motherboard manufacturer. My DisplayLink device does not work at all, or I get the message "USB device not recognized", when connecting on Windows.Please refer to this article about the system requirements and how to install on Android from the Google Play Store. Extend mode: This is the default setting for a DisplayLink display. The display is an extension of the Windows desktop, and will be extended to the right of the main display. Moving the mouse off the right hand side of the display will move it onto the extended screen. The relative positions of the extended displays can be configured and is described below.

If using the DL-3900 or DL-5900, which supports dual outputs, resolutions above 2048x1152 will be unavailable if a second display is connected. If wanting to use the DL-3900 with resolutions above 2048x1152, disconnect the second display. As the DisplayLink Manager app does not rely on macOS kernel extensions, it is not only easier to install, but it will also lead to increased stability/reliability, improved behaviour across OS upgrades, and seamless updates through the App Store. If you are using a DisplayPort to HDMI, DisplayPort to DVI, DisplayPort to VGA or HDMI to VGA cable and are having issues we recommend using an active video adapter in conjunction with a video cable as illustrated below: Select the 'DisplayLink Software Installer' to begin installation of the DisplayLink driver on your Mac.Or follow the steps from TenForums: How to Add or Remove "USB 3 Link Power Management" from Power Options in Windows. If you select Moderate Power Savings, the power savings are less, but the time to recover from the Sleep state (latency) is much shorter. Passive cables and adapters do not have such a conversion chip built in. Instead they rely on the source to do the conversion. Unless the source has the ability to output analogue over DisplayPort or HDMI then an active adapter is required for VGA output. If you select Off, there are no power savings, and the current will run regardless of what state the laptop is in. (depending on if your laptop is plugged in or not). Jumbo frames are not supported on DL-3xxx, DL-5xxx or DL-6xxx series Ethernet ports. Disable jumbo frames on any network with DisplayLink Ethernet ports connected, otherwise problems could be found with network behaviour.

This article describes how to configure the DisplayLink displays. There are three configuration modes: If you have Windows 7 installed see thisarticle to obtain the latest USB 3.0 host controller driver IMPORTANT: Make sure your Ubuntu distibution is up to date by running sudo apt-get update and then sudo apt-get dist-upgrade from a Terminal. If the distribution is not up to date, you may find issues with blank or corrupted USB displays. Include keywords along with product name. Examples: "DeskJet 3630 paper jam", "EliteBook 840 G3 bios update"There have been some instances of DisplayLink devices with a yellow "!" in device manager, and opening the properties shows that they have an error code 43. This is usually due to a driver fault. To fix this error we recommend trying the following steps: DisplayLink Manager app will introduce new elements/features like a graphical user interface shown in section 4.4. Note: This tool applies to Microsoft Windows PC's only. This tool will detect HP PCs and HP printers. It is possible to only mirror 2 displays using the windows interface. It is not possible to mirror more than 2 displays. If you want to mirror more than 2 displays, we recommend 3rd party display management tools, for example Actual Multiple Monitors. Using the Windows Display interface Ensure the computer power settings are set to "High Performance" including the GPU settings to Maximum