Cabinet Door Restraint, 8 Inch Stainless Steel Cupboard Hinge Limiter Swing Restrictor Stopper, Flexible Braided Cable, Prevent Door From Opening Too Far Made in USA by Salt Life Solutions (2 Pack)

Product Information

Are you wondering how to keep your cabinet doors from swinging open too far? Are your cabinet doors hitting a wall? Are your cabinet doors hitting an appliance? Are your cabinet doors hitting a pendant light? Are your cabinet doors hitting another cabinet? If you answered yes to any of those questions, we have the perfect, simple solution for you. String your screw through the other end of the restraint and screw into place. Again, be sure not to tighten it 100 percent of the way. When using cabinet restraint wires, take time to figure out exactly how wide you want the doors to open. Take a look at what items you store inside the cabinet and know the minimum width to get those items in and out. Our stainless steel cabinet door restraints are the superior choice compared to the plastic hinge restriction clips offered by others. Here’s why: We opted to go with the cabinet door restraints because I read that there are some issues with the hinge restrictor clips only being compatible with certain types of hinges.

Yes, the new knobs we just installed (and the knobs the previous owner had) bang right into another cabinet in one spot and into the wall in the other. The doors don’t stop themselves soon enough. The only negative about the wire is that it is visible when the cabinet is open. But this shouldn’t be a problem for anyone. You really don’t notice it once it’s in place because it’s at the top. The plastic restriction clips put all of the stress and strain of limiting your door opening angle on the hinges themselves – something they are not designed to handle. This will cause premature failure of your cabinet hinges and possible damage to your cabinetry. We also liked that the cabinet door restraints allow you to select the open angle of the cabinet. Whether you want it to open a little wider or less wide because of the layout of your kitchen, you can make that specific adjustment. There are a couple of options on how you can fix this problem, but if you’re going for speed and ease, this is the way.Decide where you want the other end to go on the cabinet to hold the door to your preferred angle. Mark with pencil. Pre-drill in this spot. Hold the restraint up and decide where to attach it to get your desired open angle. For us, it was on the underside of the upper lip of the cabinet base. Choose how far open you want the door to go and mark that spot with a pencil. This is causing damage to the knobs and damage to the cabinets themselves. When the knobs hit the drywall, they cause dents and damage and when they hit the other knobs, they dent. Doors should be able to stop at a perfect 90 degree angle and if they don’t you can fix it yourself. Our cabinet door restraint kits are the perfect way to prevent damage to your home, boat, camper or RV.

The plastic restriction clips have only one opening angle: 86 degrees. That “one size fits all” approach may work great for the company making them, but not for the end consumer. Pre-drill a small hole in that spot. You do not need to go very deep. Be sure not to drill through the cabinet. This is just to get the screw started.Hinge restrictor clips attach to the actual hinges of your cabinet door and keep them from opening all the way, but you have to know exactly what type of hinge you have and if it’s compatible with the clips. Titus hinge angle restrictors limit the opening angle of cabinet doors and prevent damage to door or any adjacent object. Here’s how to prevent a cabinet door from hitting the wall by adding a simple wire. Options for keeping a cabinet door from opening too far If you’ve installed cabinet restraint wires, you can change the angle by changing where the restraint is attached to the door or the cabinet. The wire remains the same length, so changing where it attaches will change how much the door can open.

If your cabinet doors open wider than 90 degrees, they might be hitting the side of the cabinets next to them. This can cause damage to the knob, wall or cabinet door. We opted for the cabinet restraint wire kit because we felt that would be the easiest way to solve the problem. Note – ensure that your screw is shorter than the depth of your cabinet. Too long of a screw will poke out the front! Video tutorial Also take a look at where the wall or other doors are and figure out where you want it to stop. If you’re looking to stop your door from hitting the wall, you only need to make sure it stops just off the wall.

Thread the screw onto the restraint and screw into your pre-drilled hole. Make sure not to screw it completely flush into the cabinet. The wire needs a little give to it. The plastic restriction clips get brittle and break easily. After all, they’re only made of plastic. It’s tiny dings, but it bothers me and little dings aren’t easy to fix. And so I decided to investigate how to fix this problem! You don’t want your cabinet doors to hit each other because it can damage the door or the knob and will also make a surprisingly loud noise. Cabinet door restraints are a simple wire that physically limits the door from opening any wider than you want it to.