Windscreen Wiper Linkage Push Rod Arms Repair

Product Information

Push fit:Fitting the new covers is initially a matter of engaging the rubber pegs with the holes and then squeezing them gently in from the upper side, here. Mitsubishi recalled the 2007-2013 Outlander for wiper motor failures (recall SR-17-003). Another Mitsubishi recall (SR-16-010) covers a wiper motor in the 2011−2015 Outlander Sport / RVR.

The multimeter shows 12.38 Volt, but the motor doesn't run. This means the wiper motor is bad and needs to be replaced.

How does the rain sensing wipers work?

Rarity:The new wiper linkage comes with new mounting rubbers and new wiper spindle seals, but no wiper arm securing nuts so the originals need to be saved. Field repair:The motor plate has, in the past, broken away from the mechanism and been subsequently secured with three self-tapping screws. This is probably when the main damage happened. It’s a ‘get you home’ repair. Evidence:Although these two inner joints (left) attaching the rods to the motor’s crank arm were okay, the nearby gouge showed the linkage had been rubbing against the bulkhead. Working windshield wipers are important for safe driving. Several manufacturers have issued recalls related to the wiper system and possibly more recalls will come in the future. Initial assessment pointed to a serious engine cooling problem, but that was easily fixed. Then there have been leaking fuel pipes, a leaky injector seal, inoperative handbrake, new camshaft and fuel pump drive belts, new differential mountings and a professional interior clean to add to the bill. But we’re still comfortably within budget, including the parts for these jobs...

A scan tool also allows an active test, which means the wiper motor can be activated from the scan tool. The wiper linkage is what attaches the windscreen wiper motor to the wiper arms and blades. How does the windscreen wiper linkage work and what are the components?Left in place:This rubber bonnet seal is secured through the moulding with plastic clips that protrude through the scuttle flange, but the moulding lifts out with these still in place.

The wiper motor is a DC (direct current) 12V motor that includes a set of gears and a park switch. The park switch allows the motor to stop when wipers are positioned at the bottom of the windshield in their "park' position. The cost of a wiper linkage replacement depends on your car and what parts your car's manufacturer recommends.

Cleaning up:The remnants of the old hinge covers are lifted off and the underside of the moulding cleaned smooth, and debris removed from the holes.