AutoLine Pro Automotive Smoke Machine Leak Detector EVAP Vacuum Diagnostics Tester | Economy Series

Product Information

To make sure your smoke machine works correctly and none of the components start to burn or melt, you will need to use oil-based fluids, as water-based alternatives will become too hot and you risk breaking your equipment.

Since you can’t turn down the smoke output you can’t regulate it to a useful level. Sure, you know the leak is somewhere in that compartment, but pinpointing it to the exact cause is next to impossible. However, you can try to keep costs down by using a smoke machine at home to identify the exact location of the leak. Conclusion Toxic gases like carbon monoxide: Exposure to high levels of colorless, odorless carbon monoxide (CO) from a leaking appliance or a vehicle running in an attached garage is harmful, and can be fatal. These gases are lighter than air, so detectors should be placed high in a room to detect potential leaks. Toxic gases are identified by electrochemical and metal oxide semiconductor technologies.

EVAP smoke testing is the most effective method to find which parts are leaking in the EVAP system, but it can be expensive to have the test done by a professional. When you’re looking at EVAP smoke machines, the Vac-Leak Hunter Automotive Smoke Machine Leak Diagnostic Tester is almost identical to the Vacuum Car Smoke Machine Leak Detector that’s farther up our list. You may need additional sensors placed strategically around your home. According to the National Fire Protection Agency (NFPA), carbon monoxide detectors should be installed in a central location outside each sleeping area, and on every level of the home and in other locations where required by applicable laws, codes or standards. However, with built-in heat protection, the AUTOOL SDT106 will not exceed temperatures of 167F and is able to work in temperatures as low as -4F.

However, it does not come with any smoke oil, and you still can’t control the output flow. That’s not a huge deal if you’re using it in a home garage, if you’re in a professional automotive shop it can slow down different troubleshooting procedures. This smoke detector comes with a hanging hook, a power cord to connect to a 12V car battery, a smoke hose, an air adapter, and an EVAP kit. App-based alerts: Some devices can send data via an app to your smart phone, via WiFi or Bluetooth, to let you monitor the situation even if you’re not there. An EVAP leak may not seem serious but if gasoline vapors are able to escape this can be damaging to the environment and they may even end up trapped in the engine, causing even more expensive damage. The smoke leak detector with easy-use function and portable design, can help mechanic produce lots of smoke within 30s to detect the leaks in pipe system. Dramatically reducing diagnostic time. The hook allows you to hang it on your hood latch, the conical adapter will fit most intakes. Wide Range of Applications

No Time For the Full Review? Here Are Our Top 4 Picks:

This smoke machine from AUTOOL includes the SDT106 main unit (weighing 7,28pounds), a standard rubber and cone adapter, a hook, hard rubber hose plug, valve-core wrench, power cord clamp, and EVAP connector. While it is possible to continue driving with an EVAP leak, it is not advisable. What does a car EVAP system do? If you’re looking for the best EVAP smoke machine out there, it’s hard to top what the Stinger Pro 2 Smoke Machine brings to the table. Not only does it produce a ton of smoke, but it’s available for a phenomenal price and lasts a long time.

When your EVAP system has a leak, harmful fuel emissions are able to escape into the atmosphere, this is damaging to the environment and EVAP leaks can also cause damage to your vehicle’s engine over time. It allows you to pump visible smoke into your EVAP system. All you need to do from there is inspect the lines and look for the smoke! Once you see where the smoke is escaping you’ve found your leak, and you now know what you need to repair or replace.No matter what piping system you are testing, you will be able to find that leak once and for all with this smoke machine. This tool can be used to test EVAP systems, Vacuum leaks, low-pressure Turbo leaks, Intake Manifolds, Cooling/EGR/Exhaust Systems, and worn rubber gaskets or seals. Also, if you’re looking to use your smoke machine on more than just a vacuum system then plugsare likely a good investment. These plugs keep the smoke from escaping from acceptable exit ports, which lets you troubleshoot various systems.