Joined in 2023 
82 
63 About this deal
Priming and Painting the Boxes: When painting your wooden boxes, you should apply a single coat of primer and allow the primer to dry completely. Next, lightly sand down the primer with a high grit sandpaper, such as 320 grit.
When using the jig saw in this step, always err for a smaller hole rather than a larger hole. You can use sandpaper to make your jig saw cuts better match the hole saw cuts in step three. A standard courier service (DPD, TNT etc.) is usually used to deliver smaller items with a weight limit of 30kg and a maximum length of 1.5m per parcel. A delivery can comprise multiple parcels with no limit on total weight. Storage & organisation Furniture Textiles Kitchenware & tableware Kitchens Lighting Decoration Rugs, mats & flooring Beds & mattresses Baby & children Smart home Bathroom products Laundry & cleaning Plants & plant pots Home electronics Home improvement Outdoor living Food & beverages Christmas Shop Shop by room After dry or wet sanding your primer, you may have to do some touch-up priming in spots where you sanded away the primer. No need to resand these spots, though, unless they’re substantial areas. Lastly, apply two or three coats of paint and your boxes are finished! Wire brads (I used 1/2″ brads to nail through 1/4″ plywood and 1″ brads to nail through 1/2″ plywood.)
After allowing one coat of the sealer to dry, lightly sand with a super fine sandpaper or 0000 grade steel wool to smooth out any roughness. Then add one or two additional coats of sealer to finish it off. Sandpaper— 80 and 120, and 320 grit (120 is for sanding after box assembly, when a palm sander is handy. I always use adhesive sandpaper when using my palm sander.)
Be sure to remove any seeping wood glue before it dries! It is very difficult to sand away dried wood glue. And if you plan to stain your boxes, dried glue will repel stain and ruin your finish. Some people choose to wipe away wet wood glue with a damp rag (that’s me!), while others may use a chisel or blade to scrape it away as it begins to harden. Many can probably relate to having a messy wardrobe. But decluttering it is easier than you might think. All you need is some good storage boxes. Staining your Boxes: After sanding your boxes with 120 grit sandpaper, I recommend sanding one last time with 180 grit sandpaper before staining. You may choose to apply a wood conditioner to your wood before staining, which will help the wood accept the stain more evenly across its grain. Then apply your stain and allow it to rest for the period of time indicated on the label.This process naturally darkens the wood. Left unfinished, it will weather gray like any other wood. Thoroughly sanding in this step is super important if you plan to stain rather than paint your boxes. If you don’t completely sand away scratch marks from the 80 grit sandpaper you used in step three, then those scratches will be highlighted after applying stain. Sustainability in contract logistics refers to the practice of conducting logistics operations in a manner that minimizes negative environmental, social, and economic impacts while ensuring long-term viability. After deciding on the height, width, and depth of your boxes, determine how much lumber you will need. Plywood is sold in 4’x8′ pieces, so I chose to have 1/4″ plywood sheets cut into strips at the hardware store. The living room may not need the same storage solutions as the bedroom or the office. But it still has a way of attracting clutter and mess all the same. Extra sofa cushions, blankets, the kid’s toys, phone chargers, headphones, you name it. If you can carry it, it ends up in the living room, and more often than not on the floor.
But if you’re just painting the boxes, then a general smoothing down of the surface is good enough. Step Five: Carefully remove the duct tape from the joints after the nails are in place. Peel slowly and toward the edge of your wood panels, not away from the edge, or you may pull apart bits of the plywood in the process. I chose thermally modified poplar for this bench. Normally, poplar would be a poor choice for an outdoor project, but thermal modification changes the rules. Thermally modified wood (TMW) has essentially been cooked, removing the organic compounds. The chemical-free process makes wood more stable and resistant to decay and insects. If you're in need of long-time storage, like for summer or winter clothes, transparent boxes are a great choice. With these drawers, it becomes so much easier to know which boxes contain the stuff you need when it’s time to retrieve them. To make 11 boxes I used two full sheets of 1/4″ plywood plus about 1/2 of a sheet of 1/2″ plywood. (The 1/2″ sheet of plywood was leftover from this fold-away dollhouse project.)
Step One: Cut the pieces needed for the sides and bottom of your boxes. See the section above about determining the sizes you need. I cut 1″ wide strips from these felt blankets and put them on either side of the bottoms of the boxes. They slide super easily now. After staining, you will have rough wood that needs sealed and smoothed down again. I usually use polyurethane to seal my stained wood. If you’re using a light stain or no stain at all, you may want to use polycrylic instead, as urethane does yellow slightly over time. Turnaround times may vary during particularly busy periods, however, we generally deliver products within the timeframes stated.
Great Deal 
New Comment