Makita DHP486Z 18V Li-ion LXT Brushless Combi Drill - Batteries and Charger Not Included

Product Information

Erittäin tehokas ammattikäyttöön soveltuva akkuporakone. Porakoneen mukana tulee tukikahva, joka antaa paremman otteen ja helpottaa porakoneella poraamista. Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model

The product belongs to Makita's LXT cordless tool system. Makita LXT Cordless tools are specially designed for heavy use by professionals and quality-conscious hobbyists. The battery system already includes more than 200 compatible cordless machines and tools. LXT battery machines use 18V batteries. In some of the machines, the batteries are connected in series, thus reaching 36V voltage in the battery tool that needs more power. In Kärkkäinen's selection you can find all Makita's LXT professional power tools. Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 130Nm max. torque. Hammer Drilling mode rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter. The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.The efficient battery-powered drill has a protection system that protects the battery's operation. The battery protection system automatically turns off the device when the battery power level is too low. The protection system protects the battery from various damages and extends the battery's service life. In addition, the protection system of the cordless drill protects the battery from overload, overheating and deep discharge. Compact Design– for improved handling and control the overall length has been reduced by 27mm vs. the previous model LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application

While the new DHP486 combi hammer drill does look similar to the original DHP481, Makita has confirmed that it is the most robust drill in its class, thanks to the 130 Nm of torque it offers from its brushless motor. This allows the tightening of heavy-duty fasteners, for example, a 9 x 50mm lag bolt in screwdriver mode. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications. Special event, club or membership offers, third party promotions or prices not available to the general public ItemThumbnailImage" : "https://img.karkkainen.com/images/e_trim:4/c_pad,f_auto,h_80,q_auto,w_80/v1/tuotekuvat/0088381739702_1/makita-lxt-ddf486z-18v-akkuporakone-runko.jpg",

Terms & Conditions

Another reason users will love this new model is that it’s approximately 14% smaller than the DHP481. Measuring just 178 x 81 x 248mm, it’s more likely to fit into compact spaces, thanks to the optimised gear assembly design. Impacts Per Minute and No-Load Speed Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice. For Further Information All the impact drivers that are brushless from makita will have no problem with any screw you care to name – even a 150mm batten screw will either break the bit or the screw before the impact driver calls it a day (breaking the head off a batten screw is no fun to fix either) The better drill is the Makita DHP484, it has better specs, more compact and has a brushless motor. If having the best possible spec from the two is important, then the Makita DHP484 is the one to go for. ItemZoomImage" : "https://img.karkkainen.com/images/e_trim:4/f_auto,q_auto/v1/tuotekuvat/0088381739702_1/makita-lxt-ddf486z-18v-akkuporakone-runko.jpg"

A very efficient cordless drill suitable for professional use. The drill comes with a support handle that gives a better grip and makes drilling with the drill easier. Which model drill & driver should I be aiming for? Is the DHP484Z the right drill for me? Which Driver? Normally I would only be drilling for a few hrs in a day at most so is a 2.0A battery enough? Something else we love about the new model is the fact that it features XPT technology. XPT is a protective seal featured inside the drill, making it more resistant to dust and water and protecting the critical components inside. Because of this, people can use the drill outdoors or in harsh environments. seo_url" : "https://www.karkkainen.com/ProductDisplay?urlRequestType=Base&catalogId=10051&categoryId=22058001&productId=762280501&urlLangId=-11&langId=-11&top_category=&parent_category_rn=&storeId=10151",Speed Mechanical Gearing– high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation. If its home use, all the drivers and drills are the same to you. A tradesperson however can kill one of the plastic drills (gears) in 12 months. my son seems to be getting a tool fixed under warranty about every 4 months or so, so is always upgrading anyway.