Grandstream HandyTone HT801 ATA

Product Information

On the HT802 inter-port calling is achieved by dialing ***7X (X is the port number). For example, the user connected to port 1 can be reached by dialing *** and 71. Flash Digit Control FXS port to connect analog phone / fax machine to the phone adapter using an RJ-11 telephone cable. Note: Please use the 1.0.9.x firmwares below for GWN7600/7600LR/7610with GWN7000 1.0.9.4deployment. Assume that the call is established between phone A and B. The phone A wants to attend transfer phone B to phone C:

The Grandstream HT801 also enables analogue devices such as loud bells to be used on a VoIP service. When all the FXS ports are registered (for HT802), the simultaneous ring will have one second delay between each ring on each phone. Rebooting the HT80x from RemoteIt is therefore ready to use immediately and is supplied with a call bundle of 20 minutes of UK landline and mobile calls during a 14 day trial period. The HT801 is designed for easy configuration and easy installation, to connect your HT801, please follow the steps below: Assume that the call is established between phone A and B are in conversation. The phone A wants to blind transfer phone B to phone C:

Phone A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone. Note:DP730/DP722/DP720 firmware can be upgraded once the connected DP750/752 base is upgraded to new firmware. The firmware version on DP730/722/720 can be different from the base. Please refer to the release notes for the handset version number. The HT801 is supplied with a UK mains power supply and adaptors which enable UK phones to be connected. The Grandstream HT801 VoIP adaptor enables analogue phones to connect to a fibre broadband phone service.Insert a standard RJ11 telephone cable into the phone port and connect the other end of the telephone cable to a standard touch-tone analog telephone. Insert the Ethernet cable into the internet or LAN port of the HT801/ht802 and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.) Although the HT801 adaptor can be connected to any VoIP phone service, we supply it pre-configured for connection to the Premitel VoIP Phone Service. Once the GXW42xx V2 device is upgraded to 1.0.3.x+, it cannot be downgraded to 1.0.2 x or earlier version. Cancel Busy Call Forward. To cancel “Busy Call Forward”, dial “*91”, wait for dial tone, then hang up.