Syncros Trail DH Fender Fox 40 49 black Mudguard

Product Information

The benefits of EVOL are further enhanced by our new Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Specifications If you find an item at a lower price with another commercial internet retailer, you will receive it from us at the same price, provided the conditions listed in the link are met. Select the correct bolts for your fork (details below) and run these into the threads WITHOUT the mudguard which will 'PRIME' and clean the threads before fitting, this part is important (YOU MAY NEED TO RE-TAP THE THREADS IF DEBRIS / PAINT IS LEFT IN THE THREADS FROM THE MANUFACTURE OF THE FORKS) BOLTS: FOX = M3 (2 bolts) | OHLINS = M4 (3 bolts) | SR SUNTOUR = M6 ( *1 bolt)

Our lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Stiffer Lower Leg Arch

Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality.

Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping.All the mudguards in this test mount under the suspension fork brace, however, there is limited space between the fork crown and tire. If you are running 29-inch wheels with tall tires, the mudguard will fit very close to the tire. As a rule of thumb, it is best to ensure there is at least 18 mm of clearance (about the width of your index finger) between the mudguard and the tire to avoid rubbing. Once the mudguard is fitted, It is recommended that you release all the air pressure from your fork and compress it to its maximum travel to make sure the fork lowers do not hit the mudguard. Will my MTB mudguard break in a crash?

RapidRacerProducts Ltd accepts no liability for any damage or injury caused due to improper fitting or use of our products EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The best guards are the longest and work at all speeds. If you’re riding slowly, mud comes off the trailing edge of the tyre and is thrown upwards, but as speed increases it’s thrown further forward and you eventually ride into this spray. Having a mudguard that covers the full arc of mud trajectory is the best option. COMPATIBILITY WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre BRAKE / OFFSET: MINIMUM 44mm HUB: STD & BOOST FORKS:Finally tighten the bolts to the torque settings below: TORQUE SETTINGS: FOX, MARZOCCH & OHLINS = 1nm | SR SUNTOUR = 2nm You should be able to locate the mudguard and let go as the rubber side pads should hold it in place (ensure the slots are centrally aligned to the threaded holes on your fork) The granting of a best price is not combinable with other promotions (e.g. "free articles) from Bike-Discount. Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. IMPORTANT: You must apply the rubber adhesive side pads to the recess on the mudguard side wings, they protect your fork legs and provide vital stability and resonance damping