Flysky FS GT5 6CH AFHDS RC Transmitter with Flysky FS-BS6 Receiver For RC Car Boat [F.SAFE Out of Control Protect, ABS Setting, Control Range About 200m, Second Gen AFHDS 2A]

Product Information

Unlike the FS-GT5 and the RC7GS V3, the FS-G7P transmitter has no external antenna which makes this one easy to throw in a bag (although the FS-GT5 antenna does fold down well). Range is good, better than the FS-GT5 at distance where I have trouble seeing even large cars (around 200m). I can't exhaust the range without running an FPV setup so will just say the range should be enough for 95% of the users out there. Select appropriate size 25 7.4V lithium battery with a JST connector. Make sure it is connected with the Im leaning towards the futaba 3pv at the moment. Futaba do a 2 channel reciever for 25 quid which seems like a fair price. Its not on the compatability chart, which is annoying, but it seems like it should work with the 3pv. So i have a Flysky FS-GT3C transmitter, and ive been having range issues for a while. i'll try and keep this consise: The AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation) developed and patented by

I really enjoy using this controller, for me I've been running it in my budget brushless 124018. The controller has a good weight to it and although it is clearly made of plastic it has a better presence and weight to it than the Flysky-FS-GT5 (which I really rate). I also prefer it to the Radiolink RC6GS V3 I recently reviewed and of course the DumboRC X6 doesn't really compete. I would prefer a sponge covered wheel but this will be easy to change - hopefully Flysky offers a budget option here but the plastic wheel is ok for now. Flysky FS-GT5 2.4G 6-Channel Transmitter w/ FS-BS6 Receiver Built-in Gyro Fail-Safe #FS-GT5+BS6 Description: FLYSKV is specially developed for all radio controlled models. Offering superior protection against interferenceI bought two new Rxs as they were cheap enough, and all seemed ok-ish. the range was much improved, but the symptoms i get just before it loses range all together is a delay in response. both steering and throttle. this still did happen, closer than i would expect, but it didnt really cause me too much issues bashing. Trigger and wheel feel is smooth and precise with little to no play. It is sturdy yet light in the hand even with batteries in and at no point has it ever felt like a burden. Ergonomics are fine even for a weirdo like me that is right handed yet holds a wheel transmitter like a leftie. This is a pretty boring section for good reason - it does what you'd expect. For range I practically get about as far as I can see my big 1/10 scale DHK Hunter SCT which is probably about 200m. So far as I know I've never has a failsafe. The only way I could really push range is by setting a car up for FPV but then you are starting to get into a niche application. So in summary, for line of sight operation as we do, range is perfectly acceptable. For what it's worth I ran this same protocol in my quads and had an easy 500m range. I forgot to mention the antenna can flip up if you need extra range but since I've never gone out of range I don't really have a need. If the transmitter voltage is low the LED will flash slowly. This LED has six colors, green, blue, cyan, red, yellow, while maintaining lower power consumption and high reliable receiver sensitivity, FLYSKY's AFHDS technology

Bought a used 1/8th buggy, came with Flysky FS-GT3C transmitter, with the flysky reciever. It also came with the FS-GT3B transmitter and another receiver, which seems largely the same except for 8xAAs vs 1S lipo. All seemed well at first. This binding information only applies to the FS—GTS and the FS—BSG receiver, different receivers may requireTo ensure the gyroscope works as expected install the receiver horizontally at less that 10 degrees With all these things, there are people with and without problems. I just need something i can rely on.

Flysky noble is their posh option, someone on here has one and gave it a good review, can't remember who. https://www.rcmodelz.co.uk/flysky-fsnb4-2-4ghz-transmitter-receiver.html This has caused me enough trouble now, so i'm looking to move on to something else. i know plenty have had no issues with the flysky, but i'm not doing anything out of the ordinary here.Introduction ....................................................................................................................... 2