Bahco 316-2 Pen Reamer with Replacement Blade

Product Information

The testo 316-2-EX is a gas leak detector for the short-term detection of leaks in gas and refrigerant systems in potentially explosive atmospheres of the class ATEX II 2 G Ex ib IIC T1Gb according to Directive 2014/34/EU (ATEX). Department of Public Health, Nice University Hospital and EA 6312, University Nice Sophia-Antipolis, France. Finally, other practical features include a rechargeable battery and a flexible sensor probe for accessing difficult-to-reach places.

Lower response threshold/measuring range: Methane (CH 4 ): 1 ppm to 4.0 vol.% Propane (C3H 8 ): 1 ppm to 1.9 vol.% Hydrogen (H 2 ): 1 ppm to 4.0 vol.% Butane (C 4 H 10 ): 1 ppm to 1.5 vol.% Refrigerant: lower response threshold (detection limit): 3 g/year Where an employee contracts for supplies or services and the employer either reimburses the cost to the employee, or pays the service provider directly on the employee’s behalf, the exemption in Section 316 does not apply. Type 316 steel is not magnetic, but may be weakly magnetic after cold working. SS316 Heat Resistance

Introduction to Testo's New 316 Series of Gas Leak Detectors 

To evaluate the rate of within-couple HIV transmission (heterosexual and men who have sex with men [MSM]) during periods of sex without condoms and when the HIV-positive partner had HIV-1 RNA load less than 200 copies/mL. The air/gas mixture is flammable anywhere between these two limits, potentially leading to an explosion (critical range). Strictly, the nearest equivalent for the old 316S12 is the 316S13, so that the minimum molybdenum of 2.25 is met. Similarly, the nearest equivalent for the old 316S16 is the 316S33. For atmospheric exposure service conditions, except in extreme marine environments, the substitution of either

The 1983 and subsequent versions of the standards introduced new molybdenum content ranges of 2.0-2.5% and 2.5-3.0% for both the low and ‘standard’ carbon grades, thereby increasing the number of these grades from two to four: Below the LEL, the mixture is too lean for an explosion, and above the UEL it is too rich (non-critical range). ASTM type 316 stainless steel equivalent to ISO, European EN (German DIN, British BSI, France NF), Japanese JIS and Chinese GB standard (For reference).Excellent weldability by all standard fusion methods, both with and without filler metals. AS 1554.6 pre-qualifies welding of 316 with Grade 316 and 316L with Grade 316L rods or electrodes (or their high silicon equivalents). Heavy welded sections in Grade 316 require post-weld annealing for maximum corrosion resistance. This is not required for 316L. Grade 316Ti may also be used as an alternative to 316 for heavy section welding. Machining Division of Infectious Diseases and Hospital Epidemiology, Cantonal Hospital, St Gallen, Switzerland. Testo 316-2 Ex Gas Leak Detector with Flexible Head Technical Specifications Measurement parameters To ensure your safety, and to ensure you detect gas levels, the 316-2 gas leak detector has built-in optical and audible alarms which will sound when gas concentrations reach a certain threshold. SS has good oxidation resistance in intermittent use below 871 °C and continuous use up to 927 °C in air. In the range of 427 °C – 857 °C, it is better not to continuously use SS 316, but when 316 stainless steel is continuously used outside this temperature range, it has good heat resistance. 316L stainless steel has better carbide precipitation resistance than AISI 316 and can be used in the above temperature range. AISI SAE ASTM 316 Heat Treatment