Postsaver Pro-Wrap Standard | Wood Protector for Fence Posts | Post Saver Sleeves with Dual-Layer Rot Protector | Fence Protector | Fits 3x3” to 4x4" Square and 3” to 5" Round Posts

Product Information

As you will note from the sketch we’ve provided, our version of a sleeve has a pre-welded base plate. There are several reasons for this. The simplest way to create a removable fence post in areas that don’t get snow and ice in winter is to cast a sleeve into the ground and then use that sleeve to house the post when it’s in position. Similar butt joint reinforcement connections may be made using two to four biscuits inset into matching grooves cut into the ends of the 4x4s. Alternatively, cut a matching groove in the butt ends and glue in a wooden spline. Dowels, biscuits, and splines all reinforce the alignment and provide some lateral reinforcement.

Whatever material the posts are made of, it would be smart to drill holes where you want the screws placed first. Then go ahead and put the screws in place. Doing this will prevent damaging the screw. It will also ensure that screw goes in the right direction. Make sure that the drill bit you use to create the holes is the same size as the screws you’re going to use. After fitting the pieces together, just screw them into place. 5. Place The Extender On Top Of The Post Two other reasons rest on transportation and availability issues. Carrying and connecting two 8-foot lengths is easier than transporting a 16-foot length, especially if traversing woodland trails. The availability of long 4x4s at many small suppliers is often limited due to low demand, making splicing a necessity. Repair

Joining 4x4s for horizontal use instead of vertical use is done in a similar way. The orientation of the cuts should maximize lateral strength while preventing the retention of penetrating moisture. The stresses applied to the skid will also affect the type and orientation of the connection. A pull force versus a downward force affects the joint differently. Post to Beam Connection The simplest way to connect two 4x4s is with a butt joint. Trim the ends to be joined so they are square and smooth. Any angle, however small, can act as a shear line, and a smooth flat surface makes for a better connection.

There are numerous ways to modify a half lap. Some involve elaborate cuts and may even include a wooden key pin to secure the joint. The less complex joint retains the traditional parallel and perpendicular cuts and is easier for the novice or beginner. Weatherables is known for creating pragmatic and minimalist sleeves for people on the go, and its line of weatherable 4x4 fencepost sleeves definitely falls in line with that reputation. The weatherable 4x4fence post sleeve is good for a lifetime warranty and it fits perfectly. Make sure this fits by entering your model number. Further, it is manufactured from premium - quality, durable pvc vinyl maintenance free. That’s about it when it comes to our simple DIY removable fence post design. As you can see, it’s relatively easy to manufacture, lends itself to several applications, and can be manufactured from readily available materials. It comes with a 20-year post-replacement guarantee, so you can rest assured that your posts are protected for years to come.You can buy extension pieces that should fit with your original posts. Finding the right type of extender will depend on the type of fence posts in your fence. A glued, plated and bolted nibbed tapered scarf joint is stronger than a half lap but not as easy to cut in limited space. Although it too has two cuts per 4×4, accurate sawing is more difficult. The skill level and aesthetics of the finished joint influence the choice of connection. A poorly sawn joint won’t make for a strong connection. Conclusion There are several options for removable fence posts on the market, and one of them might well meet your needs. However, commercial options are often more expensive, more complex and have a longer lead time. So, if you just need a simple, fast solution, it’s sometimes better to manufacture it yourself. Removable Fence Post Sleeves To connect the Simpson Strong-Tie (SST) or other pre-drilled plates to the 4x4s, align and level the posts with the plates and clamp everything tightly together. Some plates have a mid-line set of holes that can align with the joint and still have enough holes for screws. Off-set opposing plates by 1/2 the distance between rows of holes, that will make it easier to fasten them. Use appropriate fasteners like SST #9 x 2-1/2” structural-connector screws to attach the plates to the posts. You might be wondering why this removable fence post design is only for areas that don’t get snow and ice.

There are many reasons to join 2 4x4s together. Making a post longer, cut too short, repairing a post, building a longer piece for a skid, and post-to-beam connections are the most common reasons. Extend Posts To remove this kind of removable fence post, you would need to remove any fence that is installed on it and then use two wrenches to loosen and remove the bolt. Easy to Manufacture from Readily Available Materials After you have made sure that the extension is level, you can go ahead and screw it into place. If you did the half-lap method I mentioned earlier then you have already completed this step. Our choice for the strongest and easiest way to join two 4×4 posts is a half-lap joint that is glued, plated, and bolted. Cutting a half lap into an existing fixed post is easier than all other cuts, except the butt joint. The two required cuts per post are simple and doable even with limited space.

If your original fence posts are concrete, you will need to use that the screws specifically made for concrete that I mentioned before. You’ll also need a carbide-tipped drill bit to be able to drill holes into the concrete. 7. Paint The Extenders Because your removable fence post sleeve will be subject to the elements, we recommend you go with hot dip galvanized steel and possibly use a high-quality anti-corrosive paint before you place it. This will help to protect the sleeve from corrosion from water.