Dryzone Anti Mould Paint 1L Magnolia – Mould Resistant for 5 Years, 10m² - 12m² coverage

Product Information

N.B. – If an unfinished, textured wallpaper (blown vinyl, woodchip etc.) or similar is to be used then it should be hung after the Surface Cleanser has fully dried. The wallpaper should then be coated with the anti-mould finish as above.

Now onto something a little bit different. Having the best anti mould additive to hand gives you so many decorative options and for this category we would go with Dryzone’s Anti Mould Additive. Note:Clean any non‐mould related contamination by wiping with a damp cloth and or sugar soap as required. Allow to dry.

Use the Dryzone® Mould Removal and Prevention Kit for Preparation

Yes, anti mould paint does a good job at inhibiting mould growth in areas where moisture and condensation is a problem as the biocides contained within the paint damage the cell membranes and essentially kills it before it has the chance to grow. It’s very easy to apply and once fully set leaves a soft sheen finish in magnolia resulting in a look that is sophistic yet simple.

Mould and Mildew Remover Prevent mould and mildew with our professional Mould and Mildew remover products.Both our standard “Anti-Mould Emulsion Paint” and our “Mould Cure”, create an active-film fungicide on the surface, upon which mould simply cannot grow. The “Thermapaint Anti-Mould” has the additional inclusion of vacuum ceramic micro-beads, which raise the surface temperature of the wall slightly, discouraging the formation of condensation on the painted surface. In that sense it is dual action paint. It is available in 72 natural colours from our Lakes & Fells collection, developed in Cumbria. Whilst not specifically labeled as anti mould, Dulux’s Easy Care Bathroom paint works much in the same way as some other paints on this list. Carefully open the Mould Eradication Additive container and add the entire contents to the paint (1 x 50ml of Mould Eradication Additive is enough to convert 2.5 litres of standard paint into a mould resisting paint; 2 x 50ml of Mould Eradication Additive is enough to convert 5 litres of paint). Mould Cure” is our HSE certified Mould and Mildew Remover, which when used in conjunction with our “Thermapaint Anti-Mould Paint” is a proven mould suppressant and re-decoration system, trusted by homeowners, social housing providers and landlords. With a soft cloth, sponge or soft brush, wash down all areas to be painted with the diluted surface cleanser taking care to remove any oil, grease or surface debris.

Dryzone are one of the top brands when it comes to damp protection so if trusted quality is at the top of your list, they might be a good choice for you. When it comes to overall quality and value for money, anti mould paints don’t get much better than Ronseal. Unlike most other paints on our list, Dulux has the advantage of providing a lovely soft sheen finish that doesn’t need to be painted over once set. The cool neutral range of colours means you can choose any colour from White Mist to Slate Grey, leaving your bathroom with a modern chic look. The information given in this product data sheet is given in good faith, based on current knowledge and experience. It relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of the company’s knowledge and belief, accurate as of the date indicated. Thermapaint Anti‐Mould will cover most existing matt finish emulsions, but care should be exercised with some eggshell, silk and vinyl finish which are typically resistant to over‐painting. Such surfaces may be “keyed” with a power orbital sander or some may respond to priming with Kingfisher Floor and Wall Sealor Weatherflex Stabilising Solution Care should be taken when sanding any pre‐1960s wood or metal finishes as these may contain harmful lead.Any surface defects should be filled before painting with a premium plaster filler e.g. Everbuild TM. All Purpose Filler. Seal any areas that remain powdery with Kingfisher Floor & Wall Seal. N.B. This kit contains enough Surface Cleanser to wash down approximately 30 – 40m² If you require less, mix accordingly (1 part Surface Cleanser to 19 parts water). If necessary, apply an appropriate primer or sealer to bare metal or masonry surfaces. For new or porous plaster surfaces thin the first coat if necessary according to the manufacturer’s instructions. Allow enough time to dry thoroughly. Industry Connections: We maintain close ties with manufacturers and brands, offering insights into trends and upcoming products. Mould and fungus are more common in areas of the home with limited ventilation or that are prone to condensation, like the bathroom. Fortunately, protecting yourbathroom withmould-resistant paint can help keepmould awayfrom yourwalls.Using damp-proof or anti-mould paint can be a cost-effective investment in the long term. These specialised paints create a protective barrier on your walls, preventing costly repairs or mould removal in the future. Browse our range of anti-mould paint anddampseal from leading brands like Ronseal, Zinsserand Polycelltoday.