Heat Resistant Sealant 1300 C - 310ml

Product Information

Sealant also prevents creosote buildup and protects against corrosion. It is recommended to seal a wood stove at least once per year, or more often if necessary. However, some regions require that you do so on an annual basis because of local conditions that may cause rapid deterioration of your chimney. After you have applied the silicone sealant, let it dry completely before using your stove. Usually this will take 24-48 hours. Once it is fully cured, your stove should be much more efficient and save you money on fuel costs!

The solution to both those problems is silicon sealant, like the Heatmate High Temperature Silicone Sealant we sell. Why use high temperature silicone sealant? Of course, there are lots of other uses for high temperature silicone sealant that don’t involve your woodburner. What people say about Heatmate High Temperature Silicone Sealant overall it was a decent unit personally i liked the acd better due to the blower but its a solid unit. if you do go with this unit i strongly recommend NOT using the heat reclaimer the unit likes a strong draw and the reclaimer would take away from that IMHO they should never be used on an EPA reburn unit, especially a cat stove.Now that you have installed your wood stove, it is important to take care of it and ensure safe operation. Here are some safety precautions to keep in mind: NOTE: Make sure to use a silicone caulk that is designed for high temperatures, as other types of caulking may not be able to withstand the extreme heat from the stove.

The sealant can be used anywhere where you need to seal a gap or joint in your stove system. This might include sealing: I have downdraft issues in the prevailing wind, and I made a custom lopsided-opening cap for that. It helped quite a bit. I'm also at 7,000' elevation, which doesn't help with draft. When the wind turns around, and puts my chimney in an updraft, everything works splendidly.Use a paint brush (or whatever type of applicator works best for you) and apply an even coat all over the stove, making sure to get into all the nooks and crannies.

No wood-burning stove installation is complete with a trusty tube of high temperature silicone sealant. To avoid smoke seeping into your room, you don’t want any gaps through the components of your stove system where it might get out. Equally, to avoid causing damage to your stove and get the most value from the fuel you burn, you do not want air to be able to get into your stove through such gaps and cause the appliance to operate at too high a temperature. Once the sealant is dry, it is time to test your stove. Turn on the heat and see if the stove is operating more efficiently than before. If you notice a difference, then congratulations! You have successfully sealed your wood stove. In between professional cleanings, you can remove any creosote buildup on your own by using a wire brush. Be sure to wear protective gear including gloves and a face mask when doing this, as creosote is toxic if ingested. You should also avoid getting the substance on your skin, as it can cause rashes and other problems.Protect your surfaces by covering them thoroughly with plastic or cardboard and tape off anything that you don’t want to get sealant on such as the floor, walls etc… CAUTION: Do not use any type of paint or other coating over the silicone sealant! Doing so will create an obstacle that prevents future oxygen from entering your stove. This can cause carbon monoxide poisoning and death.